[Voyage-linux] Output power troubles

[Kelly Hogan]

The antenna connectors are not identical.  Use the inside connector for
non-diversity antenna systems.  If you are on the other one, you are
probably not getting any signal transmit.

Also, there are versions of the MP2511MP that are 100mw.  We ended up
with a few in a batch of 50 that we purchased.  no outside difference,
so they were only discovered after testing.  

KH
NomadISP

On Wed, 2005-11-02 at 08:00, Andrew Niemantsverdriet wrote:
> Hi,
> 
> It seems that my 200mw Senao NL-2511MP Plus (mini-pci) card is not putting
> out near the power it should. Since I am in the US I would expect the full
> 200mw but this is my first Access Point with Voyage, I have been using is
> as a CPE and / or repeater before so I did not pay much attention to
> output strength. Anyway is there a setting some where that needs to be
> changed to get the full output or is something else wrong?
> 
> One more thing what is up with the 2 antenna connectors, are they identical?
> 
> Thanks for any guidance.