[Voyage-linux] error in madwifi-tools
Toth Szabolcs
(spam-protected)
Thu Sep 22 17:22:20 HKT 2005
Hi Punky,
I tried but the result is the same by me too.
regards,
Szabolcs
On Thu, 22 Sep 2005, Giorgio Ducci wrote:
> Hi Punky,
>
> thanks for your prompt answer but unfortunately does not work. The result
> is the same.
> No luck
> cheers
> Giorgio
> >May be this thread show you some hints?
> >
> >http://sourceforge.net/mailarchive/message.php?msg_id=12954540
> >
> >Looks like you need to bring down the interface first?
> >
> >Giorgio Ducci wrote:
> >
> >>Hi Toth,
> >>
> >>yes, I have kernel 2.6.8-486-voyage and madwifi-tools-20050726 and I have
> >>the same problem with the same card..WIth the previous madwifi-tools as
> >>you mention was fine for me, too. Who knows?
> >>Cheers
> >>
> >>>Dear Tse,
> >>>
> >>>The working version is the madwifi 20050105-1 which was included in the
> >>>voyage0.1sarge version.
> >>>
> >>>The voyage-0.2pre1 use the kernel-image-2.6.8-486-voyage_2.0-2 and
> >>>madwifi_20050712. This combination is useless for my card.
> >>>
> >>>I used the downloadable version from both dists and I changed nothing on
> >>>them.
> >>>
> >>>Toth
> >>>
> >>>On Wed, 21 Sep 2005, Punky Tse wrote:
> >>>
> >>> > Toth,
> >>> >
> >>> > How old is your madwifi, or which kernel or voyage version you
> >>> used? Please be more specific.
> >>> >
> >>> > Toth Szabolcs wrote:
> >>> > > Hi !
> >>> > >
> >>> > > I have an Ubiquiti Networks SuperRange2 802.11b/g 400mW High Power
> >>> Atheros
> >>> > > Wireless mini-pci card. I was able to set the Tx Power to 400wW
> >>> width the
> >>> > > old madwifi but with the new madwifi-tools I was unable to set the
> >>> tx power above 15-20dbm.
> >>> > > I tired the following but nothing changed:
> >>> > > You can see that the Tx-Power hasn't gone above 15dBm however my
> >>> card can give 27dBm.
> >>> > >
> >>> > > wrap2c:~# iwconfig ath0 txpower auto
> >>> > > wrap2c:~# iwconfig ath0
> >>> > > ath0 IEEE 802.11b ESSID:"ajka-air"
> >>> > > Mode:Master Frequency:2.412 GHz Access Point:
> >>> 00:15:6D:10:00:43
> >>> > > Bit Rate:0 kb/s Tx-Power:12 dBm Sensitivity=0/3
> >>> > > Retry:off RTS thr:off Fragment thr:off
> >>> > > Encryption key:off
> >>> > > Power Management:off
> >>> > > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm
> >>> > > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> >>> > > Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> >>> > >
> >>> > > wrap2c:~# iwconfig ath0 txpower fixed
> >>> > > wrap2c:~# iwconfig ath0
> >>> > > ath0 IEEE 802.11b ESSID:"ajka-air"
> >>> > > Mode:Master Frequency:2.412 GHz Access Point:
> >>> 00:15:6D:10:00:43
> >>> > > Bit Rate:0 kb/s Tx-Power=12 dBm Sensitivity=0/3
> >>> > > Retry:off RTS thr:off Fragment thr:off
> >>> > > Encryption key:off
> >>> > > Power Management:off
> >>> > > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm
> >>> > > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> >>> > > Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> >>> > >
> >>> > > wrap2c:~# iwconfig ath0 txpower 400mW
> >>> > > wrap2c:~# iwconfig ath0
> >>> > > ath0 IEEE 802.11b ESSID:"ajka-air"
> >>> > > Mode:Master Frequency:2.412 GHz Access Point:
> >>> 00:15:6D:10:00:43
> >>> > > Bit Rate:0 kb/s Tx-Power=15 dBm Sensitivity=0/3
> >>> > > Retry:off RTS thr:off Fragment thr:off
> >>> > > Encryption key:off
> >>> > > Power Management:off
> >>> > > Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm
> >>> > > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> >>> > > Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> >>> > >
> >>> > > I use the following modules:
> >>> > > ------------------------------------------------------------------
> >>> > > ath_hal: module license 'Proprietary' taints kernel.
> >>> > > ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
> >>> > > wlan: 0.8.6.0 (EXPERIMENTAL)
> >>> > > ath_rate_onoe: 1.0
> >>> > > ath_pci: 0.9.6.0 (EXPERIMENTAL)
> >>> > > Build date: Aug 23 2005
> >>> > > Debugging version (IEEE80211
> >>> > > ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> >>> > > ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps
> >>> 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> >>> > > ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
> >>> 54Mbps
> >>> > > ath0: H/W encryption support: WEP AES AES_CCM TKIP
> >>> > > ath0: mac 5.9 phy 4.3 radio 4.6
> >>> > > ath0: Use hw queue 1 for WME_AC_BE traffic
> >>> > > ath0: Use hw queue 0 for WME_AC_BK traffic
> >>> > > ath0: Use hw queue 2 for WME_AC_VI traffic
> >>> > > ath0: Use hw queue 3 for WME_AC_VO traffic
> >>> > > ath0: Use hw queue 8 for CAB traffic
> >>> > > ath0: Use hw queue 9 for beacons
> >>> > > Debugging version (ATH)
> >>> > > ath0: Atheros 5212: mem=0x80040000, irq=9
> >>> > > ath_pci: loaded successfully
> >>> > >
> >>> ================================================================================
> >>>
> >>> > >
> >>> > > Please help ??
> >>> > > Szabolcs Toth
> >>> > >
> >>> > >
> >>> > >
> >>> > >
> >>> > > _______________________________________________
> >>> > > Voyage-linux mailing list
> >>> > > Voyage-linux at list.voyage.hk
> >>> > > http://list.voyage.hk/mailman/listinfo/voyage-linux
> >>> >
> >>> >
> >>> > --
> >>> > Regards,
> >>> > Punky
> >>> > P U N K N ! X . c o m
> >>> > Technology + Lifestyle
> >>> > (http://www.punknix.com)
> >>> >
> >>> > Voyage Linux
> >>> > (http://www.voyage.hk/software/voyage.html)
> >>> >
> >>>
> >>>
> >>>_______________________________________________
> >>>Voyage-linux mailing list
> >>>Voyage-linux at list.voyage.hk
> >>>http://list.voyage.hk/mailman/listinfo/voyage-linux
> >>
> >>
> >>
> >>
> >>_______________________________________________
> >>Voyage-linux mailing list
> >>Voyage-linux at list.voyage.hk
> >>http://list.voyage.hk/mailman/listinfo/voyage-linux
> >
> >
> >
> >--
> >Regards,
> >Punky
> >P U N K N ! X . c o m
> >Technology + Lifestyle
> >(http://www.punknix.com)
> >
> >Voyage Linux
> >(http://www.voyage.hk/software/voyage.html)
> >
> >
>
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>
More information about the Voyage-linux
mailing list