[Voyage-linux] Reboot failure after apt-get upgrade - unstable

Mon Apr 3 09:52:53 HKT 2006

Hi Edwin,

How can I reproduce it?  And what version do you upgrade it from?  From 0.1?

- Punky

On 4/3/06, Edwin Whitelaw <Edwin.Whitelaw at nrvunwired.net> wrote:
> I've just unfortunately duplicated something that I thought was simply a
> goof on my part but may be an apt-get/package problem.
>
> I've got my apt sources file set to us.voyage.hk for the unstable tree
> so I could get the latest kernel and madwifi-ng stuff.  Everything
> upgrades fine when running
>
> apt-get dist-upgrade
>
> and the system then reboots to the new kernel fine.  However, after
> loading a few other things (that should really have nothing to do with
> this problem) such as rsync and quagga, the unit fails on reboot. with
>
> INIT: Id "T0" respawning too fast: disabled for 5 minutes
> INIT: no more processes left in this runlevel
> INIT: Id "T0" respawning too fast: disabled for 5 minutes
> .
> .
> .
> etc.
>
>
> I've made no changes to inittab from the initial load through the
> upgrades.  I do have the serial speed set to 38400 but that's never been
> a problem until now.
>
> Any comments?  How does one interrupt the boot on a WRAP to boot single
> user, BTW?
>
> Below is the entire boot console output.  Sorry about the extra data but
> it might clue someone to what's happening.
>
> --------------console output-------
> PC Engines WRAP.2B/2C v1.11
> 640 KB Base Memory
> 15360317444812864512 KB Extended Memory
>
> 01F0 Master 848A Hitachi XX.V.3.7.0.0
> Phys C/H/S 695/15/48 Log C/H/S 695/15/48
>
> LI
> LILLOO  2222..66..11  LLooaaddiinngg
> LLiinnuuxx................................
> ..............
>
> BBIIOOSS  ddaattaa  cchheecckk  ssuucccceessssffuull
>
> Linux version 2.6.15-486-voyage (2.0-10) (root at punknix-uml) (gcc version
> 3.3.5 (
> Debian 1:3.3.5-13)) #1 PREEMPT Mon Mar 27 07:45:05 GMT 2006
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
>  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> 64MB LOWMEM available.
> DMI not present.
> Allocating PCI resources starting at 10000000 (gap: 04000000:fbf00000)
> Built 1 zonelists
> Kernel command line: auto BOOT_IMAGE=Linux ro root=301 console=ttyS0,38400n8
> No local APIC present or hardware disabled
> Initializing CPU#0
> PID hash table entries: 512 (order: 9, 8192 bytes)
> Detected 266.663 MHz processor.
> Using tsc for high-res timesource
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Memory: 61868k/65536k available (1606k kernel code, 3276k reserved, 598k
> data, 1
> 40k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay using timer specific routine.. 534.32 BogoMIPS
> (lpj=1068640)
> Mount-cache hash table entries: 512
> CPU: NSC Unknown stepping 01
> Checking 'hlt' instruction... OK.
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfc47b, last bus=0
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: Device 0000:00:12.5 not found by BIOS
> Initializing Cryptographic API
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> i8042.c: No controller found.
> Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
> ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> hda: Hitachi XX.V.3.7.0.0, CFA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: max request size: 128KiB
> hda: 500400 sectors (256 MB) w/1KiB Cache, CHS=695/15/48
> hda: cache flushes not supported
>  hda: hda1
> mice: PS/2 mouse device common for all mice
> padlock: VIA PadLock not detected.
> NET: Registered protocol family 2
> IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> TCP established hash table entries: 4096 (order: 2, 16384 bytes)
> TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
> TCP: Hash tables configured (established 4096 bind 4096)
> TCP reno registered
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> IPv6 over IPv4 tunneling driver
> NET: Registered protocol family 17
> NET: Registered protocol family 15
> Using IPI Shortcut mode
>  hda: hda1
>  hda: hda1
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 140k freed
> INIT: version 2.86 booting
> * Files under mount point '/dev/shm' will be hidden.
> Will now activate swap.
> Done activating swap.
> EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
> /etc/rcS.d/S18hwclockfirst.sh: line 61: /etc/adjtime: No such file or
> directory
> Setting the system clock..
> System Clock set. Local time: Sat Jan  1 00:00:19 UTC 2000.
> Cleaning up ifupdown...done.
> Calculating module dependencies...done.
> Loading modules...
>     natsemi
> natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
>   originally by Donald Becker <becker at scyld.com>
>   http://www.scyld.com/network/natsemi.html
>   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
> natsemi eth0: NatSemi DP8381[56] at 0x80040000 (0000:00:0e.0),
> 00:0d:b9:03:7c:60
> , IRQ 10, port TP.
>     hostap_pci
> hostap_pci: 0.4.4-kernel (Jouni Malinen <jkmaline at cc.hut.fi>)
>     wd1100
> SC1x00 Watchdog driver by Inprimis Technolgies.
> wd1100.c: a few hacks by erich.titl at think.ch
>     lm77
>     scx200_acb
> All modules loaded.
> /etc/rcS.d/S22hwclock.sh: line 61: /etc/adjtime: No such file or directory
> Setting the system clock again..
> System Clock set. Local time: Sat Jan  1 00:00:25 UTC 2000.
> Loading device-mapper supportdevice-mapper: 4.4.0-ioctl (2005-01-12)
> initialised
> : dm-devel at redhat.com
> .
> Will now check all file systems.
> fsck 1.39-WIP (29-Mar-2006)
> Checking all file systems.
> Done checking file systems.
> A log is being saved in /var/log/fsck/checkfs if that location is writable.
> Setting kernel variables ...
> ... done.
> /etc/rcS.d/S35mountall.sh: line 10: /etc/init.d/bootclean.sh: No such
> file or di
> rectory
> Running 0dns-down to make sure resolv.conf is
> ok.../etc/ppp/ip-down.d/0dns-down:
>  line 33: cd: /var/run/pppconfig: No such file or directory
> Setting up networking...done.
> Setting hostname to '(none)'...hostname: the specified hostname is invalid
> done.
> Starting hotplug subsystem:
>    pci
> ath_hal: module license 'Proprietary' taints kernel.
> ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> wlan: 0.8.4.2 (svn 2006-03-27)
> ath_rate_sample: 1.2 (svn 2006-03-27)
> ath_pci: 0.9.4.5 (svn 2006-03-27)
> wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> wifi0: mac 5.9 phy 4.3 radio 3.6
> wifi0: Use hw queue 1 for WME_AC_BE traffic
> wifi0: Use hw queue 0 for WME_AC_BK traffic
> wifi0: Use hw queue 2 for WME_AC_VI traffic
> wifi0: Use hw queue 3 for WME_AC_VO traffic
> wifi0: Use hw queue 8 for CAB traffic
> wifi0: Use hw queue 9 for beacons
> wifi0: Atheros 5212: mem=0x80000000, irq=12
>      ath_pci: loaded successfully
>      natsemi: already loaded
> scx200: NatSemi SCx200 Driver
> scx200: GPIO base 0xf400
> scx200: Configuration Block base 0x9000
>      scx200: loaded successfully
> SC1200: IDE controller at PCI slot 0000:00:12.2
> SC1200: chipset revision 1
> SC1200: not 100% native mode: will probe irqs later
> SC1200: port 0x01f0 already claimed by ide0
>     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
>      sc1200: loaded successfully
>      scx200: already loaded
>    pci      [success]
>    usb
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> USB Universal Host Controller Interface driver v2.3
>    usb      [failed]
>    isapnp
>    isapnp   [success]
>    ide
>    ide      [success]
>    input
>    input    [success]
>    scsi
>    scsi     [success]
> done.
> * /etc/network/options is deprecated.
> Setting up IP spoofing protection...done (rp_filter).
> Enabling packet forwarding...done.
> Configuring network interfaces.../etc/network/interfaces:14: duplicate
> interface
> ifup: couldn't read interfaces file "/etc/network/interfaces"
> failed.
> Starting PCMCIA services...Intel ISA PCIC probe: not found.
> * Using yenta_socket instead of i82365
> cardmgr[1502]: no sockets found!
> failed.
> Running ntpdate to synchronize clockError : Temporary failure in name
> resolution
> .
> /etc/rcS.d/S55bootmisc.sh: line 28: /var/run/utmp: No such file or directory
> Initializing random number generator...done.
> INIT: Entering runlevel: 2
> Starting system log daemon: syslogdmknod: `/dev/xconsole': File exists
> chown: changing ownership of `/dev/xconsole': No such file or directory
> .
> Starting kernel log daemon: klogd.
> Starting DNS forwarder and DHCP server: dnsmasq.
> Starting advanced IEEE 802.11 management: disabled via /etc/default/hostapd
> Starting internet superserver: inetd.
> nocatsplash daemon disabled - read /etc/default/nocatsplash.
> Starting PPTP Daemon: pptpd.
> Loading capability module if not yet done.
> Starting Quagga daemons (prio:10):.
> mkdir: cannot create directory `/var/run/sshd': No such file or directory
> Starting periodic command scheduler.../usr/sbin/cron: can't open or
> create /var/
> run/crond.pid: No such file or directory
>  failed!
> Starting watchdog daemon: watchdog error:
> Cannot create directory /var/log/watchdog
>
> ### Remounting / as read-write
> ### Removing /etc/nologin
> Usage: /etc/init.d/rmnologin start|stop
> ### Remounting / as read-only
> INIT: Id "T0" respawning too fast: disabled for 5 minutes
> INIT: no more processes left in this runlevel
>
> ---------end output-----------
>
> --
> <=+=+=+==+=+=+==+=+=+=+=+=+=+=+=>
> Edwin Whitelaw, P.E.
> New River Valley Unwired, LLC
> 2200 Lonesome Dove Dr
> Christiansburg, VA 24073
> 540-239-0318
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>

--
--
Regards,
Punky
P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

Voyage Linux
(http://www.voyage.hk/software/voyage.html)