[Voyage-linux] watchdog / lm77 WRAP / olsrd-plugin (Voyage current )

[Kim-man 'Punky' TSE]

Hi Fred,

I have the latest voyage-current running and don't have problem 
installing olsrd. openssl is installed properly.

For the temperature sensors, you may unload the modules and reload it:
    modprobe -r lm77 acx200_acx
    modprobe acx200_acx base=0x810,0x820
    modprobe lm77

The temperature reading may reappear in sysfs.

Just like Micheal said, I heard about there will be no temperature 
sensor for the latest WRAP 2 (not sure about WRAP 1).  Correct me I am 
wrong.  But all of my old WRAP boards still have it. 

Regards,
Punky
===============================================
voyage:~# apt-get install olsrd olsrd-plugin
Reading package lists... Done
Building dependency tree... Done
The following extra packages will be installed:
  openssl
Suggested packages:
  olsrd-gui ca-certificates
The following NEW packages will be installed:
  olsrd olsrd-plugin openssl
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 1269kB of archives.
After unpacking 3072kB of additional disk space will be used.
Do you want to continue [Y/n]?
WARNING: The following packages cannot be authenticated!
  olsrd openssl olsrd-plugin
Authentication warning overridden.
Get:1 http://www.voyage.hk ./ olsrd 0.4.10-1 [119kB]
Get:2 http://mirrors.geekbone.org etch/main openssl 0.9.8c-4 [1004kB]
Get:3 http://www.voyage.hk ./ olsrd-plugin 0.4.10-1 [146kB]
Fetched 1269kB in 2s (534kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously deselected package olsrd.
(Reading database ... 7388 files and directories currently installed.)
Unpacking olsrd (from .../olsrd_0.4.10-1_i386.deb) ...
Selecting previously deselected package openssl.
Unpacking openssl (from .../openssl_0.9.8c-4_i386.deb) ...
Selecting previously deselected package olsrd-plugin.
Unpacking olsrd-plugin (from .../olsrd-plugin_0.4.10-1_i386.deb) ...
Setting up olsrd (0.4.10-1) ...
Not starting olsrd daemon, disabled via /etc/default/olsrd

Setting up openssl (0.9.8c-4) ...

Setting up olsrd-plugin (0.4.10-1) ...
===============================================

Frederico Marques wrote:
> Hi list,
>
> I'm a newbie user with Voyage, and I have some questions regarding the 
> setup of watchdog/lm77 on a WRAP board. I'm testing the 0.3pre1 and 
> voyage-current tarball (3 Dez). I'm following the guidelines of the 
> README file:
>
> <http://cvs.voyage.hk/cgi-bin/viewcvs.cgi/voyage-custom/src/stage1/overlay_fs/README?rev=1.2> 
>
>
> First, the configuration of the watchdog, everything is ok with the 
> kernel module wd1100, but I don't have a /dev/wd, instead a 
> /dev/watchdog:
>
> # ls -al /dev/watchdog
> crw-rw---- 1 root root 10, 130 Jan  1  2000 /dev/watchdog
>
> Also, I noticed that a process child of the watchdog daemon is 
> constantly trashing (defunct):
>
> 2985 ?        SLs    0:00 /usr/sbin/watchdog
> 3295 ?        Z      0:00  \_ [watchdog] <defunct>
>
>
> Am I doing something wrong? Should I make a /dev/wd device, as 
> described on the README or should I use this /dev/watchdog?
>
> Another question, the kernel modules lm77 and scx200_acb are loaded 
> nicely at /etc/modules but I can't read the temperature:
>
> # cat /sys/bus/i2c/drivers/lm77/0-0048/temp1_input
> cat: /sys/bus/i2c/drivers/lm77/0-0048/temp1_input: No such file or 
> directory
>
> Following the wiki guide on WRAP:
>
> # cat /sys/bus/i2c/devices/0-0048/temp1_input
> cat: /sys/bus/i2c/devices/0-0048/temp1_input: No such file or directory
>
> No luck, either.
>
> One last question, I'm trying to install the olsrd-plugins package:
>
> voyage:~# remountrw
> voyage:~# apt-get install olsrd-plugins
> Reading package lists... Done
> Building dependency tree... Done
> E: Couldn't find package olsrd-plugins
> voyage:~# apt-get install olsrd-plugin
> Reading package lists... Done
> Building dependency tree... Done
> Some packages could not be installed. This may mean that you have
> requested an impossible situation or if you are using the unstable
> distribution that some required packages have not yet been created
> or been moved out of Incoming.
>
> Since you only requested a single operation it is extremely likely that
> the package is simply not installable and a bug report against
> that package should be filed.
> The following information may help to resolve the situation:
>
> The following packages have unmet dependencies:
>  olsrd-plugin: Depends: openssl (>= 0.9.6) but it is not installable
> E: Broken packages
>
>
> No luck, but I have the ssl library:
>
> voyage:~# dpkg --list |grep ssl
> ii  libssl0.9.8                       0.9.8c-3                        
> SSL shared libraries
>
> Is there any repository or teste olsrd package for this release? I'm 
> thinking in building a new olsrd package for the current pre voyage 
> release.
>
> Thankx for any help and great distro!
>
> --fred
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux


-- 
Regards,
Punky

P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - New Senao NMP-8601 and NMP-8602 (100mW) in stock!
      - New low price for Senao NMP-8602 Plus (400mW)!