[Voyage-linux] Using WPA-PSK with voyage 0.2 and Atheros chipset(s)

Kim-man 'Punky' TSE (spam-protected)
Tue Dec 12 11:38:34 HKT 2006


Hi Robin,

I have encountered the same before 0.2 was released.  You may need to 
make hostapd to use the EAP_VERSION=1.  And the stock voyage-0.2 is able 
to support it.  Please read the following thread for this issue.
    http://www.mail-archive.com/voyage-linux@list.voyage.hk/msg00504.html

Please provide hostapd debug log.  I am not sure your meaning of latest 
version madwifi and hostapd.  Please also provide the version 
information as well.

Regards,
Punky

Robin Levett wrote:
> My WAP hardware is:-
>
> Soekris 4521-30 with a Gigabyte GN-WIAG01 mini-PCI card (Atheros 5212
> (5004XR) chipset).
>
> I have installed Voyage 0.2 with the latest (from the 0.2 repository)
> versions of madwifi and hostapd.
>
> I am connecting from a ThinkPad A22m running Win98SE using a Netgear WG511T
> PC Card using the Netgear 3.30-156 drivers (ie the latest version available
> for 98SE).
>
> I have set up the Soekris using madwifi-ng as a transparent bridge from the
> GN-WIAG01 (as ath0) to eth0; and I can connect to it from the laptop and use
> it as a WAP - but with no security at all.
>
> I am unable to persuade hostapd to use WPA-PSK security.  I have set the
> hostapd.conf file up in a number of ways (all using a separate wpa_psk
> file).  When I run "hostapd -dd /etc/hostapd.conf", it seems to work up to a
> point.  When the Netgear wizard on the laptop scans, however, it sees it as
> using WEP security, but cannot connect to it.  The attempt sets off a
> continual cycle of attempted handshakes that all terminate at stage 1/4.
>
> I have tried so many different variations of the hostapd.conf file that it
> isn't funny (and putting them all in this post would extend it more than
> somewhat) so i'd just like to approach it from the other end:-
>
> 1	Is it possible to run WPA-PSK on my Soekris using Voyage 0.2?
> 2	If someone has managed it, could they post their hostapd.conf file?
> 3	If not, will upgrading to 0.3-pre2 fix the problem?
> 4	Is there an effective way of recompiling either madwifi or hostapd?
>
> Thanks in advance for any help available.
>
> Robin Levett
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.15.15/581 - Release Date: 09/12/06
> 15:41
>
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>   


-- 
Regards,
Punky

P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - New Senao NMP-8601 and NMP-8602 (100mW) in stock!
      - New low price for Senao NMP-8602 Plus (400mW)! 





More information about the Voyage-linux mailing list