[Voyage-linux] Using WPA-PSK with voyage 0.2 and Atheros chipset(s)

[Robin Levett]

Punky

My wpa_psk file is of the form:-

00:00:00:00:00:00 [63 hex characters]

and was created by:- 

"wpa_passphrase myssid password > /etc/hostapd/wpa_psk"" 

and then editing the resultant file to add the leading 00:... and remove 
everything else.  I have checked that I didn't accidentally change the output 
by running the command again (without the redirect) and comparing the output 
with what's in the file, and it all seems to match.

I haven't tested with the 63 hex characters actually in the hostapd.conf 
file...but will have a go this evening when I return from work.

Thanks again

Regards

Robin

Kim-man 'Punky' Tse said:
> Hi Robin,
> 
> The debug message shows the authentication failed at very early stage. 
> 
> Last hope:  Are you sure you set the right things in wpa_psk_file?  I 
> would suggest that you test with wpa_passphrase parameter first, didn't you?
> 
> for wpa_psk_file, you can see the example in:
> 
http://hostap.epitest.fi/cgi-bin/viewcvs.cgi/hostap/hostapd/hostapd.wpa_psk?rev=1.1&content-type=text/vnd.viewcvs-markup
> 
> Regards,
> Punky

<long debug outputs etc snipped>
Send instant messages to your online friends http://uk.messenger.yahoo.com