[Voyage-linux] bridging interfaces

[Kim-man 'Punky' TSE]

Hi Jeff,

I must say: madwifi-ng bridging has been working since voyage-0.2. 

Modified madwifi-ng WDS bridge sample in /etc/network/interfaces like below:

# madwifi-ng WDS Bridge
#auto br0
iface br0 inet static
       address 192.168.1.2
       netmask 255.255.255.0
       network 192.168.1.0
       broadcast 192.168.1.255
       gateway 192.168.1.1
       bridge_ports eth0 ath0
       #bridge_ports eth0 ath0 ath1
       pre-up wlanconfig ath0 create wlandev wifi0 wlanmode ap
#       pre-up wlanconfig ath1 create wlandev wifi0 wlanmode wds
       pre-up iwpriv ath0 mode 3
       pre-up iwconfig ath0 essid "voyage-wds" channel 1
#       up iwpriv ath1 wds 1
#       up iwpriv ath1 wds_add AA:BB:CC:DD:EE:FF
       post-down wlanconfig ath0 destroy
#       post-down wlanconfig ath1 destroy

Regards,
Punky

jeffery at martcoinc.com wrote:
> Hello,
>  
>    I recieved an e-mail telling me how to set my br0. My new question 
> since it does not work is, what settings do I need for eth0 and ath0. 
> I tried it with them on seperate subnets, same subnets, commented out, 
> I'm stuck and I really need this thing up and running pretty quick. 
> Any help would be appreciated. I just need this thing in ap mode and 
> able to talk to my network through it preferably with ip 192.168.1.2.
>  
>  
> Thanks,
> Jeff
> ------------------------------------------------------------------------
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>   


-- 
Regards,
Punky

P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - New Senao NMP-8601 and NMP-8602 (100mW) in stock!
      - New low price for Senao NMP-8602 Plus (400mW)!