[Voyage-linux] CM9 in monitor mode -> system freeze

[Nicklas Blidmo]

Hi,
Thanks for helping me out
I have tried to get hold of the kernel oops for some time now, unfortunately
without any success. I have put up a serial console according to the voyage
Wiki:

I added this line to /etc/inittab

T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100

And I do get output in Hyperterminal, I can see all boot messages etc. and
finally it ends up with a login prompt.  Would this be sufficient to catch
the kernel oops?

/Nicklas


On 1/6/06, Michael Renzmann <mrenzmann at otaku42.de> wrote:
>
> Hi.
>
> On Fri, 2006-01-06 at 12:40 +0100, Nicklas Blidmo wrote:
> > I don't know how to go further with this problem or if there are any
> > logs which can give me any info. All help is much appreciated.
>
> You will need to catch the full kernel oops that is most probably dumped
> to the console when the freeze occurs. Since WRAPs don't have a graphics
> card, you will either need to set up your system to have a serial
> console, or make use of the Netconsole facility for this purpose.
>
> Once you have the kernel oops, please visit http://madwifi.org/newticket
> and file a new ticket for the issue you are facing. Provide the oops
> message along with information on what exactly happens and when it
> happens. A short description of your system will be of help, and please
> don't forget to mention which version of MadWifi you're actually using
> (for example by pasting the version information printed to the system
> logs when loading the modules).
> Have a look at http://madwifi.org/wiki/TracTickets if you need help with
> filling the ticket form. If you still get stuck, feel free to contact me
> off-list.
>
> Bye, Mike
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20060111/83b203ec/attachment-0001.html>