[Voyage-linux] CM9 won't associate as 802.11b client
Edwin Whitelaw
(spam-protected)
Thu Mar 16 01:05:48 HKT 2006
I'm setting up a WRAP in bridge mode with two radios, one as an 11b client
and the other as an AP. I'd like to use my CM9 card but am unable to
get it to associate to a know good AP (Orinoco AP-1000). Using a
non-madwifi prism2 card (NL-2511MP PLUS) everything works fine. WRAP is
running Voyage 0.2pre4 with upgrades. Current testing is with a single
card installed.
interfaces file entry is:
auto ath0
iface ath0 inet dhcp
pre-up wlanconfig ath0 create wlandev wifi0 wlanmode sta
pre-up iwpriv ath0 mode 2
pre-up iwconfig ath0 essid ldridge-ap1
pre-up iwconfig ath0 enc XXXXXXXXXXXXXXXXX...
duncan:/etc/network# iwconfig ath0
ath0 IEEE 802.11b ESSID:"ldridge-ap1"
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s Tx-Power:16 dBm Sensitivity=0/3
Retry:off RTS thr:off Fragment thr:off
Encryption key:XXXXXXXXX..etc Security mode:restricted
Power Management:off
Link Quality=23/94 Signal level=-72 dBm Noise level=-95 dBm
Rx invalid nwid:2 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
duncan:/etc/network# iwlist ath0 scan
ath0 Scan completed :
Cell 01 - Address: 00:60:1D:1D:21:84
ESSID:"ldridge-ap1"
Mode:Master
Frequency:2.437 GHz (Channel 6)
Quality=23/94 Signal level=-72 dBm Noise level=-95 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
Extra:bcn_int=100
Any suggestions greatly appreciated. I've googled and RTM but nothing
so far. We are using the CM9 in .11a mode as PtP backhauls at 4+ miles
(Master-Managed) with great success but this is the first time I've
tried them in .11b mode.
TIA,
Edwin
--
<=+=+=+==+=+=+==+=+=+=+=+=+=+=+=>
Edwin Whitelaw, P.E.
New River Valley Unwired, LLC
2200 Lonesome Dove Dr
Christiansburg, VA 24073
540-239-0318
More information about the Voyage-linux
mailing list