[Voyage-linux] Getting PCD-RP-101CS card to work on voyage

[Srikanth Chavali]

Hi ,
    I am trying to get this card  model "PCD-RP-101CS" with Ricoh chipset to
work along with Voyage. This is a PCMCIA card for inserting the EVDO card.
When i insert the card and boot it up i dont see nothing under
/proc/net/dev. The ethernet interface does'nt work. However when i plug this
card "PCD-RP-101CS" and boot it with the same modules loaded everything
works fine.

I loaded yenta_socket,ds, pcmcia and pcmcia_core modules. Can anyone tell me
what could be going wrong? I have included info for this purpose.

Thanks

srikanth chavali

voyage# lspci -vv shows:

  Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Step
        Region 4: I/O ports at e000 [size=16]
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
0000:00:12.5 Bridge: National Semiconductor Corporation: Unknown device 0515
        Latency: 63, Cache Line Size: 0x08 (32 bytes)
        Region 0: I/O ports at 6100 [size=64]
        Region 1: I/O ports at 6200 [size=64]

0000:00:12.1 Bridge: National Semiconductor Corporation: Unknown device 0511
        Subsystem: National Semiconductor Corporation: Unknown device 0501
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Step
voyage:~# lspci -vv > tmp.out
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
 "tmp.out"  32 lines, 1889 chars
        Region 0: I/O ports at 6300 [size=256]

0000:00:12.2 IDE interface: National Semiconductor Corporation SCx200 IDE
(rev 0

        Subsystem: National Semiconductor Corporation SCx200 IDE
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step

        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
0000:00:12.5 Bridge: National Semiconductor Corporation: Unknown device 0515
        Subsystem: National Semiconductor Corporation: Unknown device 0505
        Latency: 0
        Region 4: I/O ports at e000 [size=16]

0000:00:12.5 Bridge: National Semiconductor Corporation: Unknown device 0515
        Subsystem: National Semiconductor Corporation: Unknown device 0505
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Step

        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort

        Region 0: I/O ports at 6500 [size=64]


voyage:~# lsmod
Module                  Size  Used by
sc520_wdt               5036  1
uhci_hcd               27664  0
ehci_hcd               25352  0
sc1200                  6016  0 [permanent]
scx200                  3600  0
dm_mod                 44856  0
usbserial              25064  0
pcmcia                 29612  0
firmware_class          7552  1 pcmcia
ohci_hcd               17028  0
usbcore               102532  4 uhci_hcd,ehci_hcd,usbserial,ohci_hcd
yenta_socket           22156  0
rsrc_nonstatic         10496  1 yenta_socket
pcmcia_core            32784  3 pcmcia,yenta_socket,rsrc_nonstatic
tun                     8064  0
hostap_pci             48656  0
hostap                 99844  1 hostap_pci
ieee80211_crypt         4736  1 hostap
natsemi                22496  0
crc32                   4096  3 pcmcia,tun,natsemi

voyage#  cat /proc/net/dev

  lo:       0       0    0    0    0     0          0         0        0
sc1200                  6016  0 [permanent]
  sit0:       0       0    0    0    0     0          0         0
0dm_mod                 44856  0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20061023/99a24a26/attachment-0002.html>