[Voyage-linux] eth0 does not exist

[William M. Brack]

Jake Vickers wrote:
> Kim-man 'Punky' TSE wrote:
>> Hi Bill and all,
>>
>> I seems that the udev problem affect many of the users, especially
>> they tested in one box and transfer the CF to another.  I didn't
>> experience this problem before as these days tested voyage using PXE
>> install and configure the box without transferring the CF cards.
>>
>> So anyone has discovered a reasonable solution for it?  I am now
>> thinking about regenerating 25_persistent-net.rules everytime it boots.
>>
> The problem I'm having is on Wrap boards. After running for about 30
> minutes, the whole setup stops responding. I can't ping it on either the
> wired or wireless interfaces. I don't have a serial console on these
> machines, so I will have to post some more results later, but when I
> reboot them I am not able to ping them then either. I have replicated
> this on 3 different Wrap.2E boards, with 3 different CF cards, and 2
> different wireless cards.

It doesn't seem very likely that your problem is related to the "missing"
interfaces.  Try deleting the two files in /etc/udev/rules.d
    z25_persistent-net.rules
    z45_persistent-net-generator.rules
and reboot the WRAP board.  If the problem persists, we should start a
new mail thread to discuss what it might be, and how to debug it (for
example, use ssh to login to the WRAP, and run "tail -f /var/log/syslog"
until it fails).

Bill