[Voyage-linux] Soekris net5501 and voyage 0.4.0
Hans Harder
(spam-protected)
Sun Jul 1 00:14:09 HKT 2007
Punky,
Booted, but not everything is going well on the net5501
It recognised the AMD5536 chipset:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD5536: IDE controller at PCI slot 0000:00:14.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:14.2 (rev 01) UDMA100 controller
AMD5536: neither IDE port enabled (BIOS)
Probing IDE interface ide0...
hdb: TRANSCEND, ATA DISK drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdb: max request size: 128KiB
hdb: 3988656 sectors (2042 MB) w/1KiB Cache, CHS=3957/16/63
hdb: hdb1
But dma is still off, same error when trying to put it on.
When loading the geodewdt module it goes wrong
pc87360: Device 0x09 not activated
pc87360 9191-6620: VLM conversion set to 1s period, 160us delay
nsc_gpio initializing
platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
platform pc8736x_gpio.0: GPIO ioport 6600 reserved
BUG: unable to handle kernel paging request at virtual address ffffff6e
printing eip:
c01d08a3
*pde = 00001067
*pte = 00000000
Oops: 0002 [#1]
PREEMPT
Modules linked in: geodewdt pc8736x_gpio nsc_gpio pc87360 hwmon_vid
i2c_isa i2c_core usblp ehci_hcd ohci_hcd usbcore via_rhine mii bitrev crc32
CPU: 0
EIP: 0060:[<c01d08a3>] Not tainted VLI
EFLAGS: 00010296 (2.6.20-486-voyage #1)
EIP is at iowrite16+0x29/0x2d
eax: 00000306 ebx: c162ad9c ecx: 00000306 edx: ffffff6e
esi: c162ac00 edi: c162adc4 ebp: e085eb00 esp: c148dec8
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 2867, ti=c148c000 task=c146e030 task.ti=c148c000)
Stack: e0860042 c162ac00 c162ad9c c0128038 e085eb48 c02da1c4 e085eb0c
000000cc
000008f4 00000320 df499800 00000420 00000000 00000000 00000000
00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
Call Trace:
[<e0860042>] geodewdt_init+0x42/0xa8 [geodewdt]
[<c0128038>] sys_init_module+0x1393/0x14ca
[<c0102970>] syscall_call+0x7/0xb
=======================
Code: 0a c3 89 c1 81 fa ff ff 03 00 77 1c 89 d0 66 31 c0 3d 00 00 01 00
74 04 0f 0b eb fe 0f b7 c1 81 e2 ff ff 00 00 66 ef c3 0f b7 c0 <66> 89
02 c3 89 c2 3d ff ff 03 00 77 1a 66 31 c0 3d 00 00 01 00
EIP: [<c01d08a3>] iowrite16+0x29/0x2d SS:ESP 0068:c148dec8
<6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel at redhat.com
Hans
> On 6/29/2007 4:26 AM, Kim-man 'Punky' TSE wrote:
> Hi Hans and all,
>
> I have made several updates to voyage kernel and distro that are now
> available in voyage-current daily build:
>
> - add build date in voyage login banner (/etc/motd)
> - add ALIX and 5501 profile in voyage.update
> - enable CS5535/36 chipset support (dma mode for ide is now working)
> - most importantly, watchdog driver, geodewdt, for ALIX (and should work
> for 5501) is now in place!
>
> voyage-current with above features is with build date = 20070628. If
> you download it from mirror, please wait for 1 day to be available.
>
> Regards,
> Punky
>
> Hans Harder wrote:
>> Punky,
>>
>> For the soekris net5501 only the following modules are needed:
>> pc87360
>> pc8736x_gpio
>>
>> this gives:
>> voyage:/etc# lsmod
>> Module Size Used by
>> ipv6 209036 16
>> bridge 41880 0
>> llc 5268 1 bridge
>> dm_mod 41420 0
>> pc8736x_gpio 3956 0
>> nsc_gpio 2816 1 pc8736x_gpio
>> pc87360 16784 0
>> hwmon_vid 2432 1 pc87360
>> i2c_isa 3712 1 pc87360
>> i2c_core 15760 2 pc87360,i2c_isa
>> ehci_hcd 22412 0
>> ohci_hcd 14468 0
>> usbcore 96408 3 ehci_hcd,ohci_hcd
>> via_rhine 18056 0
>> mii 4352 1 via_rhine
>> bitrev 1792 1 via_rhine
>> crc32 3840 1 via_rhine
>>
>> voyage:/etc# sensors
>> pc87366-isa-6620
>> Adapter: ISA adapter
>> in0: +3.01 V (min = +0.00 V, max = +3.01 V)
>> in1: +1.25 V (min = +0.00 V, max = +3.01 V)
>> in2: +2.55 V (min = +0.00 V, max = +3.01 V)
>> in3: +0.61 V (min = +0.00 V, max = +3.01 V)
>> in4: +2.53 V (min = +0.00 V, max = +3.01 V)
>> in5: +2.53 V (min = +0.00 V, max = +3.01 V)
>> in6: +2.65 V (min = +0.00 V, max = +3.01 V)
>> Vsb: +3.38 V (min = +3.00 V, max = +3.59 V)
>> Vdd: +3.38 V (min = +3.00 V, max = +3.59 V)
>> Vbat: +3.01 V (min = +0.00 V, max = +3.01 V)
>> AVdd: +3.36 V (min = +3.00 V, max = +3.59 V)
>> CPU0 Temp: +98 C (low = -55 C, high = +127 C)
>> CPU0 Crit: +127 C
>> CPU1 Temp: +127 C (low = -55 C, high = +127 C) OPEN
>> CPU1 Crit: +127 C ALARM
>> S-IO Temp: +52 C (low = -55 C, high = +127 C)
>> S-IO Crit: +127 C
>> vid: +0.000 V (VRM Version 0.0)
>>
>> Hans
>>
>>
>> On 6/24/2007 5:59 PM, Punky Tse wrote:
>>> I don't have net5501 so I can't test it. Same as ALIX, I believe the
>>> following modules are not needed for net5501:
>>>
>>> lm77
>>> wd1100 sysctl_wd_graceful=0 sysctl_wd_timeout=30
>>>
>>> Watchdog driver are still missing for ALIX and net5501. I have been
>>> told that CS5536 driver is able to program as watchdog timer, and I
>>> also have the kernel codes for "multi-function general purpose
>>> timer", but there is still a long way to program the timer API for
>>> watchdog purpose.
>>>
>>> Regards,
>>> Punky
>>>
>>> Hans Harder wrote:
>>>> Tomorrow I will be getting a net5501 and I am planning to try it out
>>>> with voyage 0.4.0
>>>> Since the net5501 is almost the same as the Wrap Alix, I selected
>>>> the wrap profile for generating the cf image
>>>> net5501: Geode LX800 with CS5536 companion chip, network 4x
>>>> VT6105M, serial console
>>>>
>>>> my current et/modules looks now like:
>>>> natsemi hostap_pci wd1100 sysctl_wd_graceful=0
>>>> sysctl_wd_timeout=30 lm77
>>>> scx200_acb base=0x810,0x820
>>>> w83627hf
>>>>
>>>> Can somebody advise what modules there should be loaded ?
>>>>
>>>> Hans
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Voyage-linux mailing list
>>>> Voyage-linux at list.voyage.hk
>>>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>>
>
>
More information about the Voyage-linux
mailing list