**SPAM** Re: [Voyage-linux] Soekris net5501 and voyage 0.4.0
Punky Tse
(spam-protected)
Sun Jul 1 01:57:59 HKT 2007
Hi Hans,
here is lspci output, no big difference that yours.
00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode
companion] IDE (rev 01) (prog-if 80 [Master])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248, Cache Line Size: 32 bytes
Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at ff00 [size=16]
00: 22 10 9a 20 05 00 a0 02 01 80 01 01 08 f8 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 ff 00 00 00 00 00 00 00 00 00 00 22 10 9a 20
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 02 f0 00 00 00 00 00 00 a8 a8 a8 20 3f 00 ff 20
50: 03 03 03 03 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Hans Harder wrote:
> Punky,
>
> can you give me the output of lspci -vvvxxx on the alix board
>
> Hans
>
>
> > On 6/30/2007 7:09 PM, Punky Tse wrote:
>> Hans,
>> 1. ALIX board reports the following that shows DMA support:
>>
>> AMD5536: IDE controller at PCI slot 0000:00:0f.2
>> AMD5536: chipset revision 1
>> AMD5536: not 100% native mode: will probe irqs later
>> AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
>> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
>> Probing IDE interface ide0...
>> hda: CF 512MB, ATA DISK drive
>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>> Probing IDE interface ide1...
>> hda: max request size: 128KiB
>> hda: 1015056 sectors (519 MB) w/1KiB Cache, CHS=1007/16/63, DMA
>> hda: hda1
>>
>> 2. That means geodewdt does not work with net5501 at the moment. I
>> will remove geodewdt in net5501 profile in voyage.update. If
>> geodewdt works, you can see it from dmesg.
>> voyage:~# dmesg|grep geode-m
>> geode-mfgpt: 6 timers available.
>> geode-mfgpt: Registered timer 1
>>
>> Regards,
>> Punky
>>
>> Hans Harder wrote:
>>> Punky,
>>>
>>> Booted, but not everything is going well on the net5501
>>>
>>> It recognised the AMD5536 chipset:
>>>
>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>> idebus=xx
>>> AMD5536: IDE controller at PCI slot 0000:00:14.2
>>> AMD5536: chipset revision 1
>>> AMD5536: not 100% native mode: will probe irqs later
>>> AMD5536: 0000:00:14.2 (rev 01) UDMA100 controller
>>> AMD5536: neither IDE port enabled (BIOS)
>>> Probing IDE interface ide0...
>>> hdb: TRANSCEND, ATA DISK drive
>>> Probing IDE interface ide1...
>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>> hdb: max request size: 128KiB
>>> hdb: 3988656 sectors (2042 MB) w/1KiB Cache, CHS=3957/16/63
>>> hdb: hdb1
>>>
>>> But dma is still off, same error when trying to put it on.
>>>
>>>
>>> When loading the geodewdt module it goes wrong
>>>
>>> pc87360: Device 0x09 not activated
>>> pc87360 9191-6620: VLM conversion set to 1s period, 160us delay
>>> nsc_gpio initializing
>>> platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
>>> platform pc8736x_gpio.0: GPIO ioport 6600 reserved
>>> BUG: unable to handle kernel paging request at virtual address ffffff6e
>>> printing eip:
>>> c01d08a3
>>> *pde = 00001067
>>> *pte = 00000000
>>> Oops: 0002 [#1]
>>> PREEMPT
>>> Modules linked in: geodewdt pc8736x_gpio nsc_gpio pc87360 hwmon_vid
>>> i2c_isa i2c_core usblp ehci_hcd ohci_hcd usbcore via_rhine mii
>>> bitrev crc32
>>> CPU: 0
>>> EIP: 0060:[<c01d08a3>] Not tainted VLI
>>> EFLAGS: 00010296 (2.6.20-486-voyage #1)
>>> EIP is at iowrite16+0x29/0x2d
>>> eax: 00000306 ebx: c162ad9c ecx: 00000306 edx: ffffff6e
>>> esi: c162ac00 edi: c162adc4 ebp: e085eb00 esp: c148dec8
>>> ds: 007b es: 007b ss: 0068
>>> Process modprobe (pid: 2867, ti=c148c000 task=c146e030
>>> task.ti=c148c000)
>>> Stack: e0860042 c162ac00 c162ad9c c0128038 e085eb48 c02da1c4
>>> e085eb0c 000000cc
>>> 000008f4 00000320 df499800 00000420 00000000 00000000
>>> 00000000 00000000
>>> 00000000 00000000 00000000 00000000 00000000 00000000
>>> 00000000 00000000
>>> Call Trace:
>>> [<e0860042>] geodewdt_init+0x42/0xa8 [geodewdt]
>>> [<c0128038>] sys_init_module+0x1393/0x14ca
>>> [<c0102970>] syscall_call+0x7/0xb
>>> =======================
>>> Code: 0a c3 89 c1 81 fa ff ff 03 00 77 1c 89 d0 66 31 c0 3d 00 00 01
>>> 00 74 04 0f 0b eb fe 0f b7 c1 81 e2 ff ff 00 00 66 ef c3 0f b7 c0
>>> <66> 89 02 c3 89 c2 3d ff ff 03 00 77 1a 66 31 c0 3d 00 00 01 00
>>> EIP: [<c01d08a3>] iowrite16+0x29/0x2d SS:ESP 0068:c148dec8
>>> <6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
>>> dm-devel at redhat.com
>>>
>>>
>>> Hans
>>>
>>>
>>>> On 6/29/2007 4:26 AM, Kim-man 'Punky' TSE wrote:
>>>> Hi Hans and all,
>>>>
>>>> I have made several updates to voyage kernel and distro that are
>>>> now available in voyage-current daily build:
>>>>
>>>> - add build date in voyage login banner (/etc/motd)
>>>> - add ALIX and 5501 profile in voyage.update
>>>> - enable CS5535/36 chipset support (dma mode for ide is now working)
>>>> - most importantly, watchdog driver, geodewdt, for ALIX (and should
>>>> work for 5501) is now in place!
>>>>
>>>> voyage-current with above features is with build date = 20070628.
>>>> If you download it from mirror, please wait for 1 day to be available.
>>>>
>>>> Regards,
>>>> Punky
>>>>
>>>> Hans Harder wrote:
>>>>> Punky,
>>>>>
>>>>> For the soekris net5501 only the following modules are needed:
>>>>> pc87360
>>>>> pc8736x_gpio
>>>>>
>>>>> this gives:
>>>>> voyage:/etc# lsmod
>>>>> Module Size Used by
>>>>> ipv6 209036 16
>>>>> bridge 41880 0
>>>>> llc 5268 1 bridge
>>>>> dm_mod 41420 0
>>>>> pc8736x_gpio 3956 0
>>>>> nsc_gpio 2816 1 pc8736x_gpio
>>>>> pc87360 16784 0
>>>>> hwmon_vid 2432 1 pc87360
>>>>> i2c_isa 3712 1 pc87360
>>>>> i2c_core 15760 2 pc87360,i2c_isa
>>>>> ehci_hcd 22412 0
>>>>> ohci_hcd 14468 0
>>>>> usbcore 96408 3 ehci_hcd,ohci_hcd
>>>>> via_rhine 18056 0
>>>>> mii 4352 1 via_rhine
>>>>> bitrev 1792 1 via_rhine
>>>>> crc32 3840 1 via_rhine
>>>>>
>>>>> voyage:/etc# sensors
>>>>> pc87366-isa-6620
>>>>> Adapter: ISA adapter
>>>>> in0: +3.01 V (min = +0.00 V, max = +3.01 V)
>>>>> in1: +1.25 V (min = +0.00 V, max = +3.01 V)
>>>>> in2: +2.55 V (min = +0.00 V, max = +3.01 V)
>>>>> in3: +0.61 V (min = +0.00 V, max = +3.01 V)
>>>>> in4: +2.53 V (min = +0.00 V, max = +3.01 V)
>>>>> in5: +2.53 V (min = +0.00 V, max = +3.01 V)
>>>>> in6: +2.65 V (min = +0.00 V, max = +3.01 V)
>>>>> Vsb: +3.38 V (min = +3.00 V, max = +3.59 V)
>>>>> Vdd: +3.38 V (min = +3.00 V, max = +3.59 V)
>>>>> Vbat: +3.01 V (min = +0.00 V, max = +3.01 V)
>>>>> AVdd: +3.36 V (min = +3.00 V, max = +3.59 V)
>>>>> CPU0 Temp: +98 C (low = -55 C, high = +127 C)
>>>>> CPU0 Crit: +127 C
>>>>> CPU1 Temp: +127 C (low = -55 C, high = +127 C) OPEN
>>>>> CPU1 Crit: +127 C ALARM
>>>>> S-IO Temp: +52 C (low = -55 C, high = +127 C)
>>>>> S-IO Crit: +127 C
>>>>> vid: +0.000 V (VRM Version 0.0)
>>>>>
>>>>> Hans
>>>>>
>>>>>
>>>>> On 6/24/2007 5:59 PM, Punky Tse wrote:
>>>>>> I don't have net5501 so I can't test it. Same as ALIX, I believe
>>>>>> the following modules are not needed for net5501:
>>>>>>
>>>>>> lm77
>>>>>> wd1100 sysctl_wd_graceful=0 sysctl_wd_timeout=30
>>>>>>
>>>>>> Watchdog driver are still missing for ALIX and net5501. I have
>>>>>> been told that CS5536 driver is able to program as watchdog
>>>>>> timer, and I also have the kernel codes for "multi-function
>>>>>> general purpose timer", but there is still a long way to program
>>>>>> the timer API for watchdog purpose.
>>>>>>
>>>>>> Regards,
>>>>>> Punky
>>>>>>
>>>>>> Hans Harder wrote:
>>>>>>> Tomorrow I will be getting a net5501 and I am planning to try it
>>>>>>> out with voyage 0.4.0
>>>>>>> Since the net5501 is almost the same as the Wrap Alix, I
>>>>>>> selected the wrap profile for generating the cf image
>>>>>>> net5501: Geode LX800 with CS5536 companion chip, network 4x
>>>>>>> VT6105M, serial console
>>>>>>>
>>>>>>> my current et/modules looks now like:
>>>>>>> natsemi hostap_pci wd1100 sysctl_wd_graceful=0
>>>>>>> sysctl_wd_timeout=30 lm77
>>>>>>> scx200_acb base=0x810,0x820
>>>>>>> w83627hf
>>>>>>>
>>>>>>> Can somebody advise what modules there should be loaded ?
>>>>>>>
>>>>>>> Hans
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Voyage-linux mailing list
>>>>>>> Voyage-linux at list.voyage.hk
>>>>>>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>>>
>>
>>
More information about the Voyage-linux
mailing list