[Voyage-linux] Lexar CF Professional - no boot device found

[Edwin Whitelaw]

Folks,

I've been running Voyage on WRAPs for the last two years and have used 
both San Disk and Kingston CFs (256Mb and 512MB) with zero problems.  
Just got in some 512MB Lexar Professional (Lt) 80x units for my latest 
builds and am getting "no boot device found" errors. 

I did an A-B test of my load procedure ( starting with fdisk, mke2fs, 
tunefs and the voyage.update) using one of the older CFs and the 
identical download directory.  On one occasion, the Lexar did actually 
boot but after about 10 tries it has not booted again.  The Kingston 
works every time.

There are no problems indicated during any of the installation steps, 
only the failure to boot when installed in the WRAP.  (BTW, the WRAP 
BIOS are 1.11)

Anyone else have this problem or have successfully used the Lexar CFs?

Thanks,

Edwin

-- 
<=+=+=+==+=+=+==+=+=+=+=+=+=+=+=>
Edwin Whitelaw, P.E.
New River Valley Unwired, LLC
2200 Lonesome Dove Dr
Christiansburg, VA 24073
540-239-0318