[Voyage-linux] Soekris net5501 and voyage 0.4.0

[Hans Harder]

Punky,

For the soekris net5501 only the following modules are needed:
pc87360
pc8736x_gpio

this gives:
voyage:/etc# lsmod
Module                  Size  Used by
ipv6                  209036  16
bridge                 41880  0
llc                     5268  1 bridge
dm_mod                 41420  0
pc8736x_gpio            3956  0
nsc_gpio                2816  1 pc8736x_gpio
pc87360                16784  0
hwmon_vid               2432  1 pc87360
i2c_isa                 3712  1 pc87360
i2c_core               15760  2 pc87360,i2c_isa
ehci_hcd               22412  0
ohci_hcd               14468  0
usbcore                96408  3 ehci_hcd,ohci_hcd
via_rhine              18056  0
mii                     4352  1 via_rhine
bitrev                  1792  1 via_rhine
crc32                   3840  1 via_rhine

voyage:/etc# sensors
pc87366-isa-6620
Adapter: ISA adapter
in0:       +3.01 V  (min =  +0.00 V, max =  +3.01 V)
in1:       +1.25 V  (min =  +0.00 V, max =  +3.01 V)
in2:       +2.55 V  (min =  +0.00 V, max =  +3.01 V)
in3:       +0.61 V  (min =  +0.00 V, max =  +3.01 V)
in4:       +2.53 V  (min =  +0.00 V, max =  +3.01 V)
in5:       +2.53 V  (min =  +0.00 V, max =  +3.01 V)
in6:       +2.65 V  (min =  +0.00 V, max =  +3.01 V)
Vsb:       +3.38 V  (min =  +3.00 V, max =  +3.59 V)
Vdd:       +3.38 V  (min =  +3.00 V, max =  +3.59 V)
Vbat:      +3.01 V  (min =  +0.00 V, max =  +3.01 V)
AVdd:      +3.36 V  (min =  +3.00 V, max =  +3.59 V)
CPU0 Temp:   +98 C  (low  =   -55 C, high =  +127 C)
CPU0 Crit:  +127 C
CPU1 Temp:  +127 C  (low  =   -55 C, high =  +127 C)   OPEN
CPU1 Crit:  +127 C ALARM
S-IO Temp:   +52 C  (low  =   -55 C, high =  +127 C)
S-IO Crit:  +127 C
vid:      +0.000 V  (VRM Version 0.0)

Hans


On 6/24/2007 5:59 PM, Punky Tse wrote:
> I don't have net5501 so I can't test it.  Same as ALIX, I believe the 
> following modules are not needed for net5501:
> 
> lm77
> wd1100 sysctl_wd_graceful=0 sysctl_wd_timeout=30
> 
> Watchdog driver are still missing for ALIX and net5501.  I have been 
> told that CS5536 driver is able to program as watchdog timer, and I also 
> have the kernel codes for "multi-function general purpose timer", but 
> there is still a long way to program the timer API for watchdog purpose.
> 
> Regards,
> Punky
> 
> Hans Harder wrote:
>> Tomorrow I will be getting a net5501 and I am planning to try it out 
>> with voyage 0.4.0
>> Since the net5501 is almost the same as the Wrap Alix, I selected the 
>> wrap profile for generating the cf image
>> net5501: Geode LX800 with CS5536 companion chip, network 4x  VT6105M, 
>> serial console
>>
>> my current et/modules looks now like:
>> natsemi   hostap_pci wd1100 sysctl_wd_graceful=0 
>> sysctl_wd_timeout=30   lm77
>> scx200_acb base=0x810,0x820
>> w83627hf
>>
>> Can somebody advise what modules there should be loaded ?
>>
>> Hans
>>
>>
>>
>>
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
> 
>