[Voyage-linux] Prism2.5 WEP Client

[Edwin Whitelaw]

If all you want is simple WEP for the 2611, you should be able to add 
the following to your interface setup in /etc/network/interfaces.

wireless-key s:1234567890123 (or whatever 13 character ASCII key matches 
the other end.  If you use the hex format, remove the "s:")

This assumes a 128 bit key.

Edwin

Jan Hetges wrote:
> Hi all
> i have a wrap-board running voyage-0.4.1 (linux-2.6.20-486-voyage)
> with two senao 2511mp-plus, prism2.5 based.
> one in adhoc mode for local meshing, and one in managed mode on
> a 30Km link to the "Upstream-WISP".
> I didn't have too much trouble connencting to that in normal managed
> mode (with hostap driver). But he likes hidden ssid and wep encryption... 
> so i tried with hostap and with/without wpasupplicant (hostap and wext).
> as the hostap documentation suggests client mode might be better
> supported with other drivers, i tried hermes/orinoco, as well
> with/without wpasupplicant... but no luck yet.
> any experiences with linux-wlan-ng for that? ...i'll try that next.
> any suggestions, help, hints greatly apreciated.
>
> thanks
>
>   --Jan
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>   

-- 
<=+=+=+==+=+=+==+=+=+=+=+=+=+=+=>
Edwin Whitelaw, P.E.
New River Valley Unwired, LLC
2200 Lonesome Dove Dr
Christiansburg, VA 24073
540-239-0318