[Voyage-linux] Help test 2.6.23-rc5 kernel for ALIX 2/3

[Kim-man 'Punky' Tse]

HI all,

I have built the 2.6.23-rc5 kernel that includes the new geode and mfgpt 
detection code.

    
http://www.voyage.hk/dists/unstable/linux/linux-image-2.6.23-rc5-486-voyage_4.0-3_i386.deb

I only have the board with very old BIOS.  The geode codes work but it 
hangs after PCI initialization.  Could anyone help to test the alix 2/3 
board with 0.92 BIOS?

Regards,
Punky
========================================================
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 997.08 BogoMIPS 
(lpj=498543)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
geode-mfgpt:  Registered timer 0
mfgpt-timer:  registering the MFGT timer as a clock event.
geode:  8 MFGPT timers available.
PCI: PCI BIOS revision 2.10 entry at 0xfca73, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
PCI: Probing PCI hardware
PCI: Device 0000:00:01.2 not found by BIOS
PCI: Device 0000:00:0f.2 not found by BIOS
PCI: Device 0000:00:0f.3 not found by BIOS
PCI: Device 0000:00:0f.4 not found by BIOS
PCI: Device 0000:00:0f.5 not found by BIOS
<--- it hangs here
========================================================