[Voyage-linux] wifi0: unknown hardware address type 801

[Donald Day]

I've loaded 4.1 on a Soekris net4511.
I have a Ubiquiti SR5 mini-pci card installed.
I get the following when booting.
With the proper? madwifi modules (listed below) the
4511 doesn't seem to recognize the SR5.

Thanks in advance for any help you can provide.

Don

-----------boot snip-------------
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...ath_hal:
module license 'Proprietary' taints kernel.
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111,
RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (0.9.3)
Yenta: CardBus bridge found at 0000:00:09.0
[0000:0000]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:09.0, mfunc 0x00000002,
devctl 0x60
Yenta: ISA IRQ mask 0x0000, PCI irq 10
Socket status: 30000006
ath_pci: 0.9.4.5 (0.9.3)
ath_rate_sample: 1.2 (0.9.3)
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps<6>cs: IO port probe 0x100-0x3af: 36Mbps 48Mbps
54Mbps
wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 5.9 phy 4.3 radio 3.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xa0010000, irq=11
 clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
done.
Activating swap...done.
EXT2-fs warning: mounting unchecked fs, running e2fsck
is recommended
/etc/rcS.d/S11hwclock.sh: line 51: /etc/adjtime: No
such file or directory
Setting the system clock..
Cleaning up ifupdown....
Loading kernel modules...hostap_pci: 0.4.4-kernel
(Jouni Malinen <jkmaline at cc.hut.fi>)
done.
Loading device-mapper supportdevice-mapper: ioctl:
4.11.0-ioctl (2006-10-12) initialised:
dm-devel at redhat.com
.
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
done.
Setting kernel variables...done.
Mounting local filesystems...failed.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...Internet Software
Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet
Software Consortium.
All rights reserved.

Please contribute if you find this software useful.
For info, please visit
http://www.isc.org/dhcp-contrib.html

wifi0: unknown hardware address type 801
------------------------------------------------

modules:
ii  madwifi-modules-2.6.20-486-voyage 0.9.3-3+4.0-2   
               modules for the Multiband Atheros
Driver for
ii  madwifi-tools                     0.9.3+dfsg-1    
               tools for the Multiband Atheros Driver
for W



       
____________________________________________________________________________________
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. 
http://mobile.yahoo.com/go?refer=1GNXIC