[Voyage-linux] mounting local file systems failed

[Wayne Lee]

Hi Guys


I'm playing with a new install of voyage 0.4.1, when mounting the filesystems during boot it is failing, it then continues to load the OS fine and it can remount the drives RW and Ro at the last stages of boot.

Below is the boot process and marked the mount processes with *****.


Thanks 


Wayne


   [Linux-initrd @ 0xfe10000, 0x1df28f bytes]

Linux version 2.6.20-486-voyage (root at punknix-uml) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Mon Jul 16 06:39:47 GMT 2007 ()
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000000ff00000 end: 0000000010000000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
256MB LOWMEM available.
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->    65536
early_node_map[1] active PFN ranges
    0:        0 ->    65536
DMI not present or invalid.
Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
Detected 266.668 MHz processor.
Built 1 zonelists.  Total pages: 65024
Kernel command line: root=/dev/hdb1 console=ttyS0,9600n8
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 254652k/262144k available (1610k kernel code, 6936k reserved, 562k data, 148k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffbb000 - 0xfffff000   ( 272 kB)
    vmalloc : 0xd0800000 - 0xfffb9000   ( 759 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
      .init : 0xc0322000 - 0xc0347000   ( 148 kB)
      .data : 0xc029297e - 0xc031f1ac   ( 562 kB)
      .text : 0xc0100000 - 0xc029297e   (1610 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 533.84 BogoMIPS (lpj=266924)
Mount-cache hash table entries: 512
Compat vDSO mapped to ffffe000.
Remapping vsyscall page to ffffe000
CPU: NSC Unknown stepping 01
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
PCI: Probing PCI hardware
PCI: Bridge: 0000:00:0a.0
  IO window: d000-dfff
  MEM window: a4000000-a7ffffff
  PREFETCH window: 20000000-200fffff
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1916k freed
geode-mfgpt:  Not a Geode GX/LX processor
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SC1200: IDE controller at PCI slot 0000:00:12.2
SC1200: chipset revision 1
SC1200: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
hdb: CF CARD 1GB, ATA DISK drive
hdb: sc1200_set_xfer_mode(MW DMA 2)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdb: max request size: 128KiB
hdb: 1981728 sectors (1014 MB) w/1KiB Cache, CHS=1966/16/63, DMA
 hdb: hdb1
i8042.c: Can't read CTR while initializing i8042.
i8042: probe of i8042 failed with error -5
padlock: No VIA PadLock drivers have been loaded.
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 148k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
natsemi dp8381x driver, version 2.1, Sept 11, 2006
  originally by Donald Becker <becker at scyld.com>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
natsemi eth0: NatSemi DP8381[56] at 0xa0000000 (0000:00:06.0), 00:00:24:c9:49:a4, IRQ 10, port TP.
natsemi eth1: NatSemi DP8381[56] at 0xa0001000 (0000:00:07.0), 00:00:24:c9:49:a5, IRQ 10, port TP.
natsemi eth2: NatSemi DP8381[56] at 0xa0002000 (0000:00:08.0), 00:00:24:c9:49:a6, IRQ 10, port TP.
natsemi eth3: NatSemi DP8381[56] at 0xa4000000 (0000:01:00.0), 00:00:24:c8:2d:18, IRQ 5, port TP.
natsemi eth4: NatSemi DP8381[56] at 0xa4001000 (0000:01:01.0), 00:00:24:c8:2d:19, IRQ 11, port TP.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 11, io mem 0xa0003000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local-premount ...
Done.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.

INIT: version 2.86 booting

hostname: the specified hostname is invalid
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...scx200: NatSemi SCx200 Driver
scx200: GPIO base 0x6100
scx200: Configuration Block base 0x6000
done.
Activating swap...done.
/etc/rcS.d/S11hwclock.sh: line 51: /etc/adjtime: No such file or directory
Setting the system clock..
Cleaning up ifupdown....
Loading kernel modules...hostap_pci: 0.4.4-kernel (Jouni Malinen <jkmaline at cc.hut.fi>)
done.
Loading device-mapper supportdevice-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel at redhat.com
TSC appears to be running slowly. Marking it as unstable
Time: pit clocksource has been installed.
.
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
done.
Setting kernel variables...done.
***** Mounting local filesystems...failed.  *****
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...eth0: DSPCFG accepted after 0 usec.
eth1: DSPCFG accepted after 0 usec.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
Mobile IPv6
eth2: DSPCFG accepted after 0 usec.
ADDRCONF(NETDEV_UP): eth2: link is not ready
eth3: DSPCFG accepted after 0 usec.
ADDRCONF(NETDEV_UP): eth3: link is not ready
eth4: DSPCFG accepted after 0 usec.
ADDRCONF(NETDEV_UP): eth4: link is not ready
done.
Starting "Shorewall firewall": not done (check /var/log/shorewall-init.log).
Starting portmap daemon....

INIT: Entering runlevel: 2

Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting DNS forwarder and DHCP server: dnsmasq.
Starting portmap daemon...Already running..
Starting advanced IEEE 802.11 management: disabled via /etc/default/hostapd.
nocatsplash daemon disabled - read /etc/default/nocatsplash.
* Not starting internet superserver: no services enabled.
Starting PPTP Daemon: pptpd.
Starting network management services: snmpd.
Starting OpenBSD Secure Shell server: sshd.
Starting periodic command scheduler: crond.
Starting watchdog daemon: watchdog.
***** Remounting / as read-write ... Done. *****
***** Removing /etc/nologin ... Done. *****
***** Remounting / as read-only ... Done. *****

Debian GNU/Linux 4.0 MAN-D&D ttyS0

MAN-D&D login: