[Voyage-linux] mounting local file systems failed * SOLVED *

Mon Apr 14 18:08:58 HKT 2008

Solved,

One of the main changes I had made (apart from installing other software) was to change the root RW  partition from 8mb to 15mb.

I had made the same change on an older version without any trouble, Punky is there any reason it causes a failure now and is it still possible to change it?

Thanks

Wayne

> -----Original Message-----
> From: voyage-linux-bounces+wayne.lee=link-connect.com at list.voyage.hk
> [mailto:voyage-linux-bounces+wayne.lee=link-connect.com at list.voyage.hk]
> On Behalf Of Wayne Lee
> Sent: 14 April 2008 10:26
> To: voyage-linux at voyage.hk
> Subject: [Voyage-linux] mounting local file systems failed
> 
> Hi Guys
> 
> 
> I'm playing with a new install of voyage 0.4.1, when mounting the
> filesystems during boot it is failing, it then continues to load the OS
> fine and it can remount the drives RW and Ro at the last stages of
> boot.
> 
> Below is the boot process and marked the mount processes with *****.
> 
> 
> Thanks
> 
> 
> Wayne
> 
> 
>    [Linux-initrd @ 0xfe10000, 0x1df28f bytes]
> 
> [6nLinux version 2.6.20-486-voyage (root at punknix-uml) (gcc version
> 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Mon Jul 16
> 06:39:47 GMT 2007 ()
> BIOS-provided physical RAM map:
> sanitize start
> sanitize end
> copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end:
> 000000000009fc00 type: 1
> copy_e820_map() type is E820_RAM
> copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end:
> 00000000000a0000 type: 2
> copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end:
> 0000000000100000 type: 2
> copy_e820_map() start: 0000000000100000 size: 000000000ff00000 end:
> 0000000010000000 type: 1
> copy_e820_map() type is E820_RAM
> copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end:
> 0000000100000000 type: 2
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
>  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> 256MB LOWMEM available.
> Zone PFN ranges:
>   DMA             0 ->     4096
>   Normal       4096 ->    65536
> early_node_map[1] active PFN ranges
>     0:        0 ->    65536
> DMI not present or invalid.
> Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
> Detected 266.668 MHz processor.
> Built 1 zonelists.  Total pages: 65024
> Kernel command line: root=/dev/hdb1 console=ttyS0,9600n8
> No local APIC present or hardware disabled
> Initializing CPU#0
> PID hash table entries: 1024 (order: 10, 4096 bytes)
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 254652k/262144k available (1610k kernel code, 6936k reserved,
> 562k data, 148k init, 0k highmem)
> virtual kernel memory layout:
>     fixmap  : 0xfffbb000 - 0xfffff000   ( 272 kB)
>     vmalloc : 0xd0800000 - 0xfffb9000   ( 759 MB)
>     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
>       .init : 0xc0322000 - 0xc0347000   ( 148 kB)
>       .data : 0xc029297e - 0xc031f1ac   ( 562 kB)
>       .text : 0xc0100000 - 0xc029297e   (1610 kB)
> Checking if this processor honours the WP bit even in supervisor
> mode... Ok.
> Calibrating delay using timer specific routine.. 533.84 BogoMIPS
> (lpj=266924)
> Mount-cache hash table entries: 512
> Compat vDSO mapped to ffffe000.
> Remapping vsyscall page to ffffe000
> CPU: NSC Unknown stepping 01
> Checking 'hlt' instruction... OK.
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=1
> PCI: Using configuration type 1
> Setting up standard PCI resources
> PCI: Probing PCI hardware
> PCI: Bridge: 0000:00:0a.0
>   IO window: d000-dfff
>   MEM window: a4000000-a7ffffff
>   PREFETCH window: 20000000-200fffff
> NET: Registered protocol family 2
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
> TCP: Hash tables configured (established 8192 bind 4096)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 1916k freed
> geode-mfgpt:  Not a Geode GX/LX processor
> io scheduler noop registered
> io scheduler cfq registered (default)
> Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing
> enabled
> ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> mice: PS/2 mouse device common for all mice
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> SC1200: IDE controller at PCI slot 0000:00:12.2
> SC1200: chipset revision 1
> SC1200: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio
>     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
> hdb: CF CARD 1GB, ATA DISK drive
> hdb: sc1200_set_xfer_mode(MW DMA 2)
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdb: max request size: 128KiB
> hdb: 1981728 sectors (1014 MB) w/1KiB Cache, CHS=1966/16/63, DMA
>  hdb: hdb1
> i8042.c: Can't read CTR while initializing i8042.
> i8042: probe of i8042 failed with error -5
> padlock: No VIA PadLock drivers have been loaded.
> padlock: VIA PadLock not detected.
> padlock: VIA PadLock Hash Engine not detected.
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI Shortcut mode
> Time: tsc clocksource has been installed.
> Freeing unused kernel memory: 148k freed
> Loading, please wait...
> Begin: Loading essential drivers... ...
> Done.
> Begin: Running /scripts/init-premount ...
> natsemi dp8381x driver, version 2.1, Sept 11, 2006
>   originally by Donald Becker <becker at scyld.com>
>   http://www.scyld.com/network/natsemi.html
>   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
> natsemi eth0: NatSemi DP8381[56] at 0xa0000000 (0000:00:06.0),
> 00:00:24:c9:49:a4, IRQ 10, port TP.
> natsemi eth1: NatSemi DP8381[56] at 0xa0001000 (0000:00:07.0),
> 00:00:24:c9:49:a5, IRQ 10, port TP.
> natsemi eth2: NatSemi DP8381[56] at 0xa0002000 (0000:00:08.0),
> 00:00:24:c9:49:a6, IRQ 10, port TP.
> natsemi eth3: NatSemi DP8381[56] at 0xa4000000 (0000:01:00.0),
> 00:00:24:c8:2d:18, IRQ 5, port TP.
> natsemi eth4: NatSemi DP8381[56] at 0xa4001000 (0000:01:01.0),
> 00:00:24:c8:2d:19, IRQ 11, port TP.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> ohci_hcd 0000:00:13.0: OHCI Host Controller
> ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
> ohci_hcd 0000:00:13.0: irq 11, io mem 0xa0003000
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 3 ports detected
> Done.
> Begin: Mounting root file system... ...
> Begin: Running /scripts/local-top ...
> Done.
> Begin: Running /scripts/local-premount ...
> Done.
> Begin: Running /scripts/local-bottom ...
> Done.
> Done.
> Begin: Running /scripts/init-bottom ...
> Done.
> 
> INIT: version 2.86 booting
> 
> hostname: the specified hostname is invalid
> Starting the hotplug events dispatcher: udevd.
> Synthesizing the initial hotplug events...done.
> Waiting for /dev to be fully populated...scx200: NatSemi SCx200 Driver
> scx200: GPIO base 0x6100
> scx200: Configuration Block base 0x6000
> done.
> Activating swap...done.
> /etc/rcS.d/S11hwclock.sh: line 51: /etc/adjtime: No such file or
> directory
> Setting the system clock..
> Cleaning up ifupdown....
> Loading kernel modules...hostap_pci: 0.4.4-kernel (Jouni Malinen
> <jkmaline at cc.hut.fi>)
> done.
> Loading device-mapper supportdevice-mapper: ioctl: 4.11.0-ioctl (2006-
> 10-12) initialised: dm-devel at redhat.com
> TSC appears to be running slowly. Marking it as unstable
> Time: pit clocksource has been installed.
> .
> Checking file systems...fsck 1.40-WIP (14-Nov-2006)
> done.
> Setting kernel variables...done.
> ***** Mounting local filesystems...[31mfailed.[39;49m  *****
> Activating swapfile swap...done.
> Setting up networking....
> Configuring network interfaces...eth0: DSPCFG accepted after 0 usec.
> eth1: DSPCFG accepted after 0 usec.
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> Mobile IPv6
> eth2: DSPCFG accepted after 0 usec.
> ADDRCONF(NETDEV_UP): eth2: link is not ready
> eth3: DSPCFG accepted after 0 usec.
> ADDRCONF(NETDEV_UP): eth3: link is not ready
> eth4: DSPCFG accepted after 0 usec.
> ADDRCONF(NETDEV_UP): eth4: link is not ready
> done.
> Starting "Shorewall firewall": not done (check /var/log/shorewall-
> init.log).
> Starting portmap daemon....
> 
> INIT: Entering runlevel: 2
> 
> Starting system log daemon: syslogd.
> Starting kernel log daemon: klogd.
> Starting DNS forwarder and DHCP server: dnsmasq.
> Starting portmap daemon...Already running..
> Starting advanced IEEE 802.11 management: disabled via
> /etc/default/hostapd.
> nocatsplash daemon disabled - read /etc/default/nocatsplash.
> [33m*[39;49m Not starting internet superserver: no services enabled.
> Starting PPTP Daemon: pptpd.
> Starting network management services: snmpd.
> Starting OpenBSD Secure Shell server: sshd.
> Starting periodic command scheduler: crond.
> Starting watchdog daemon: watchdog.
> ***** Remounting / as read-write ... Done. *****
> ***** Removing /etc/nologin ... Done. *****
> ***** Remounting / as read-only ... Done. *****
> 
> Debian GNU/Linux 4.0 MAN-D&D ttyS0
> 
> MAN-D&D login:
> 
> 
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux

[Voyage-linux] mounting local file systems failed *** SOLVED ***

[Voyage-linux] mounting local file systems failed * SOLVED *