[Voyage-linux] Problem with ALIX 2C0

[Kim-man 'Punky' Tse]

Hi Cool,

Voyage 0.4.1 never comes with 2.6.23 kernel.  Are you using voyage-current?

2.6.23+ kernel requires a very old bios to boot ALIX.  See below message 
for more info.

http://www.mail-archive.com/voyage-linux@list.voyage.hk/msg01598.html.

Regards,
Punky

Cool/Explosion wrote:
> Hi,
> i try stable voyage (0.4.1) on Alix 2C0 LX700/2L 128MB RAM and it 
> works fine, but when i try current voyage so it stop when booting...
>
> root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
> kernel /vmlinuz root=/dev/hda1 console=ttyS0,38400n8
>   [Linux-bzImage, setup=0x2800, size=0x1454b8]
> initrd /initrd.img
>   [Linux-initrd @ 0x7e03000, 0x1ece54 bytes]
>
> Linux version 2.6.23-486-voyage (2.6.23-2) (root at punknix-uml) (gcc 
> version 4.1.2 20061115 (prerelease) (Debi7
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> 128MB LOWMEM available.
> Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    32768
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
>    0:        0 ->    32768
> DMI not present or invalid.
> Allocating PCI resources starting at 10000000 (gap: 08000000:f7f00000)
> Built 1 zonelists in Zone order.  Total pages: 32512
> Kernel command line: root=/dev/hda1 console=ttyS0,38400n8
> No local APIC present or hardware disabled
> Initializing CPU#0
> PID hash table entries: 512 (order: 9, 2048 bytes)
> Detected 431.648 MHz processor.
> Console: colour dummy device 80x25
> console [ttyS0] enabled
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Memory: 124752k/131072k available (1756k kernel code, 5844k reserved, 
> 628k data, 160k init, 0k highmem)
> virtual kernel memory layout:
>    fixmap  : 0xfffb9000 - 0xfffff000   ( 280 kB)
>    vmalloc : 0xc8800000 - 0xfffb7000   ( 887 MB)
>    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
>      .init : 0xc0358000 - 0xc0380000   ( 160 kB)
>      .data : 0xc02b70d9 - 0xc035419c   ( 628 kB)
>      .text : 0xc0100000 - 0xc02b70d9   (1756 kB)
> Checking if this processor honours the WP bit even in supervisor 
> mode... Ok.
> Calibrating delay using timer specific routine.. 864.21 BogoMIPS 
> (lpj=432106)
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
> CPU: L2 Cache: 128K (32 bytes/line)
> Compat vDSO mapped to ffffe000.
> CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
> Checking 'hlt' instruction... OK.
> NET: Registered protocol family 16
>
>
> Any ideas???
>
>
> Bye Cool...
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux