[Voyage-linux] voyage on ALIX 2c2 not booting (linux novice)

[Kim-man 'Punky' TSE]

If you can't get the grub prompt, you can try the lilo as a bootloader 
and see if it works.  This sometimes happens if you are running 
voyage.update on a non-Debian host for installing to CF.

Regards,
Punky


Mathieu Simon wrote:
> Hi Voyagers
>
> I tried installing Voyage 0.5.2 on a 1GB CF Card for my new Alix 2c2 
> (tinyBIOS 0.99) It must be quite a Linux novices' error that I don't 
> even see GRUB booting when connected to the box by serial console. 
> After recognizing the cf card, booting stops. - Hardware must be ok 
> because I was able booting an EMBCop Image before. I wanted to switch 
> over to voyage for learning more about Linux firewalling myself. I 
> also found the article about the MFGPT Bug, but obviously thats not 
> the point. The install was done on a standard lenny box following the 
> instructions in README once formating manually and once using the 
> format-cf.sh script.  Apart from some perl localization warnings I had 
> no errors during install and voyages' files seem to be on the card.Any 
> hints?
>
> Thanks for any response.
> Mathieu
>
> P.S: Sorry for first inconvenient subject title and double post...
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>   


-- 
Regards,
Punky

Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
  - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
  - Network Engineering, Development Platform and Consultation