R: [Voyage-linux] Alix1/3 VGA support (lxfb)

[Dario Finardi]

Yes, you're correct.

I'm investigating about the way to use such cheap and low power consumption boards (alix pcengines and soekris) to build embedded devices with the ability to drive display not charging the cpu with the heavy X11 infrastructure.

About X11: I see the Geode support was introduced in X11 starting from Debian 4.0 Lenny and Sid.
Etch hasn't such a driver yet.

Have you some roadmap timing to port Voyage from Etch to Lenny yet?

NOTE: I tested X11 without any specific video driver. Geode is driven only as a plain VGA with really poor performances and supporting few resolutions/color depth.

Regards,
dario  

-----Messaggio originale-----
Da: Kim-man 'Punky' TSE [mailto:punkytse at punknix.com] 
Inviato: mercoledì 21 maggio 2008 3.37
A: Dario Finardi
Cc: voyage-linux at voyage.hk
Oggetto: Re: [Voyage-linux] Alix1/3 VGA support (lxfb)

Hi

I am not convinced why a geode lx driver is needed.  As far as I read from http://wiki.laptop.org/go/Hardware_Drivers and kernel documentation, framebuffer is for provide graphical support on kernel console.  Correct me if i am wrong.  Any other strong reason than that? 

Regards,
Punky


Dario Finardi wrote:
> I was looking for the lxfb module to have optimized support of the 
> Geode framebuffer.
> I made an hand-check, then installed module-assistant too.
> I see the lxfb module ins't available in the Voyage mainstream 
> distribution.
>
> Someone with a solution?
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>   


--
Regards,
Punky

Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
  - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
  - Network Engineering, Development Platform and Consultation