[Voyage-linux] Voyage Latest and Alix2c3

[Kim-man 'Punky' Tse]

Hi Stuart,

Please read this:

http://linux.voyage.hk/?q=node/30

You need latest bios if you run Voyage Linux 0.5.0.

Regards,
Punky


Stuart Poulton wrote:
> Hi All,
>  
> Just started out with voyage on my alix2c3, installed to the CF being 
> careful to select ALIX as the board type.. I get the following, it 
> appears to hang partway through booting, any pointer gratefully received.
>  
> PC Engines ALIX.2 v0.98b                       
> 640 KB Base Memory                 
> 261120 KB Extended Memory                        
>  
> 01F0 Master 044A SMI MODEL                         
> Phys C/H/S 15473/16/63 Log C/H/S 970/255/63 
> LBA                                              
> GRUB Loading stage1.5.                     
>  
>
> GRUB loading, please wait...  
>  
>
>     GNU GRUB  version 0.97  (640K lower / 261120K upper 
> memory)                                                              
>  
>  +-------------------------------------------------------------------------+                                                                            
>
>  | 
> voyage-linux-30May08                                                        
>
>  
>   Booting 'voyage-linux-30May08'                               
>  
> root (hd0,0)           
>  Filesystem type is ext2fs, partition type 
> 0x83                                              
> kernel /vmlinuz root=LABEL=ROOT_FS  
> console=ttyS0,38400n8                                                         
>
>    [Linux-bzImage, setup=0x2800, 
> size=0x14d9d8]                                              
> initrd /initrd.img                 
>    [Linux-initrd @ 0xfdf3000, 0x1fcfd0 
> bytes]                                            
>  
> Linux version 2.6.23-486-voyage (2.6.23-2) (root at punknix-uml 
> <mailto:root at punknix-uml>) (gcc version 
> 4.1.2                                                                                
>
>  20061115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Wed May 21 
> 15:31:49 GMT 
> 200                                                                                
>
> 8
> BIOS-provided phy              
>  BIOS-e820: 0000000000000000 - 00000000000a0000 
> (usable)                                                       
>  BIOS-e820: 00000000000f0000 - 0000000000100000 
> (reserved)                                                         
>  BIOS-e820: 0000000000100000 - 0000000010000000 
> (usable)                                                       
>  BIOS-e820: 00000000fff00000 - 0000000100000000 
> (reserved)                                                         
> 0MB HIGHMEM available.                     
> 256MB LOWMEM available.                      
> Zone PFN ranges:               
>   DMA             0 ->     4096                              
>   Normal       4096 ->    65536                              
>   HighMem     65536 ->    65536                              
> Movable zone start PFN for each node                                   
> early_node_map[1] active PFN ranges                                  
>     0:        0 ->    65536                          
> DMI not present or invalid                       
> Allocating PCI resources starting at 20000000 (gap: 
> 10000000:eff00000)                                                                      
>
> Built 1 zonelists in Zone order.  Total pages: 
> 65024                                                   
> Kernel command line: root=LABEL=ROOT_FS  
> console=ttyS0,38400n8                                                              
>
> No local APIC present or hardware 
> disabled                                         
> Initializing CPU#0                 
> PID hash table entries: 1024 (order: 10, 4096 
> bytes)                                                   
> Detected 498.048 MHz processor.                              
>  
> Console: colour dummy device 80x25
> console [ttyS0] enabled
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 254452k/262144k available (1808k kernel code, 7124k reserved, 
> 640k data,
>  164k init, 0k highmem)
> virtual kernel memory layout:
>     fixmap  : 0xfffac000 - 0xfffff000   ( 332 kB)
>     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>     vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
>     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
>       .init : 0xc0368000 - 0xc0391000   ( 164 kB)
>       .data : 0xc02c4021 - 0xc036419c   ( 640 kB)
>       .text : 0xc0100000 - 0xc02c4021   (1808 kB)
> Checking if this processor honours the WP bit even in supervisor 
> mode... Ok.
> Calibrating delay using timer specific routine.. 997.07 BogoMIPS 
> (lpj=498536)
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
> CPU: L2 Cache: 128K (32 bytes/line)
> Compat vDSO mapped to ffffe000.
> CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
> Checking 'hlt' instruction... OK.
> NET: Registered protocol family 16
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>