[Voyage-linux] "malloc: ....assertion botched" after init
Dominique Petit
(spam-protected)
Mon Nov 3 16:34:56 HKT 2008
Skipped content of type multipart/alternative-------------- next part --------------
PC Engines ALIX.2 v0.99
640 KB Base Memory
15360
31744
48128
64512
80896
97280
113664
130048
146432
162816
179200
195584
211968
228352
244736
261120 KB Extended Memory
Waiting for HDD ...
01F0 Master 848A HMS360404D5CF00
Phys C/H/S 7936/16/63 Log C/H/S 992/128/63
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997,1998,1999 Intel Corporation
VIA Rhine III Management Adapter v2.43 (2005/12/15)
CLIENT MAC ADDR: 00 0D B9 15 94 1C.
DHCP.-\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\\||//--\
CLIENT IP: 192.168.1.19 MASK: 255.255.255.0 DHCP IP: 192.168.1.200
GATEWAY IP: 192.168.1.1
TFTP.
TFTP.|
PXELINUX 3.31 Debian-2007-03-09 Copyright (C) 1994-2005 H. Peter Anvin
==============================================================================
__ __
\ \/ /___ __ __ ___ ___ ___
\ // _ \\ \/ /,-_ |/ _ |/ -_)
\/ \___/ \ / \___,\_ |\___|
_/_/ _'_|
{ V o y a g e } - L i n u x
< http://linux.voyage.hk >
1. PXE Boot Voyage Linux with a login shell
2. Start automated install for WRAP (/dev/hda and 38400 serial console)
3. Start automated install for ALIX (/dev/hda and 38400 serial console)
4. Start automated install for 45/48xx (/dev/hda and 19200 serial console)
5. Start automated install for 55xx (/dev/hda and 19200 serial console)
6. Start automated install for gerenic PC (/dev/hda and no serial console)
==============================================================================
boot: 3
Loading linux.........................
Loading initrd.img.....................................
Ready.
Linux version 2.6.23-486-voyage (2.6.23-2) (root at punknix-uml) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Wed May 21 15:31:49 GMT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
256MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 65536
HighMem 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 65536
DMI not present or invalid.
Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: initrd=initrd.img autoinstall=alix boot=casper netboot=nfs nfsroot=192.168.1.200:/live_media casper-getty console=ttyS0,38400n8 BOOT_IMAGE=linux
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 498.056 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 254324k/262144k available (1808k kernel code, 7292k reserved, 640k data, 164k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffac000 - 0xfffff000 ( 332 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
.init : 0xc0368000 - 0xc0391000 ( 164 kB)
.data : 0xc02c4021 - 0xc036419c ( 640 kB)
.text : 0xc0100000 - 0xc02c4021 (1808 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 997.08 BogoMIPS (lpj=498544)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
geode: 8 MFGPT timers available.
PCI: PCI BIOS revision 2.10 entry at 0xfcd03, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
PCI: Probing PCI hardware
Time: tsc clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2202k freed
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
hda: HMS360404D5CF00, CFA DISK drive
Clocksource tsc unstable (delta = 129874865 ns)
Time: pit clocksource has been installed.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 7999488 sectors (4095 MB) w/128KiB Cache, CHS=7936/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
geode-aes: GEODE AES engine enabled.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 164k freed
Loading, please wait...
mkdir: Cannot create directory `dev/.initramfs': No such file or directory
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
udevd-event[884]: run_program: exec of program '/lib/udev/net.agent' failed
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
eth0: VIA Rhine III (Management Adapter) at 0xe0000000, 00:0d:b9:15:94:1c, IRQ 10.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link c5e1.
eth1: VIA Rhine III (Management Adapter) at 0xe0040000, 00:0d:b9:15:94:1d, IRQ 11.
eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth2: VIA Rhine III (Management Adapter) at 0xe0080000, 00:0d:b9:15:94:1e, IRQ 12.
eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
udevd-event[1497]: run_program: exec of program '/lib/udev/net.aehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000
gent' failed
udevd-event[1499]ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
: run_program: eusb usb1: configuration #1 chosen from 1 choice
xec of program 'hub 1-0:1.0: USB hub found
/lib/udev/net.aghub 1-0:1.0: 4 ports detected
ent' failed
udevd-event[1501]: run_program: exec of program '/lib/udev/net.agent' failed
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Done.
Begin: Mounting root file system... ...
eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Registering unionfs 2.2.4 (for 2.6.23.16)
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
loop: module loaded
unionfs: new lower inode mtime (bindex=1, name=/)
unionfs: new lower inode mtime (bindex=1, name=etc)
unionfs: new lower inode mtime (bindex=1, name=etc)
unionfs: new lower inode mtime (bindex=1, name=etc)
unionfs: new lower inode mtime (bindex=1, name=etc)
unionfs: new lower inode mtime (bindex=1, name=etc)
unionfs: new lower inode mtime (bindex=1, name=etc)
cp: unable to open `/root/var/log/': Is a directory
Done.
Begin: Running /scripts/init-bottom ...
Done.
unionfs: new lower inode mtime (bindex=1, name=var)
INIT: version 2.86 booting
unionfs: new lower inode mtime (bindex=1, name=rw)
unionfs: new lower inode mtime (bindex=1, name=wtmp)
unionfs: new lower inode mtime (bindex=1, name=var)
malloc: ../bash/unwind_prot.c:288: assertion botched
free: underflow detected; mh_nbytes out of range
Aborting...
malloc: ../bash/parse.y:3684: assertion botched
malloc: block on free list clobbered
Aborting.../etc/rcS.d/S01glibc.sh: line 32: [: : integer expression expected
malloc: ../bash/subst.c:2946: asserti
INIT: Entering runlevel: 2
Starting system log daemon: syslogdunionfs: new lower inode mtime (bindex=1, name=log)
unionfs: new lower inode mtime (bindex=0, name=syslog)
.
malloc: ../bash/parse.y:3684: assertion botched
malloc: block on free list clobbered
Aborting...Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting DNS forwarder and DHCP server: dnsmasqNET: Registered protocol family 10
lo: Disabled Privacy Extensions
unionfs: new lower inode mtime (bindex=1, name=lib)
unionfs: new lower inode mtime (bindex=1, name=var)
.
Starting portmap daemon...
malloc: ../bash/parse.y:1399: assertion botched
malloc: block on free list clobbered
Aborting....
Starting advanced IEEE 802.11 management: disabled via /etc/default/hostapd
malloc: ../bash/parse.y:1399: assertion botched
malloc: block on free list clobbered
Aborting....
nocatsplash daemon disabled - read /etc/default/nocatsplash.
Starting internet superserver: inetd.
Starting PPTP Daemon: pptpd.
/etc/rc2.d/S20ssh: line 7: 2434 Aborted ( /usr/sbin/sshd -\? 2>&1 | grep -q OpenSSH ) 2>/dev/null
Starting periodic command scheduler: crond.
malloc: ../bash/parse.y:4894: assertion botched
free: start and end chunk sizes differ
Aborting.../etc/init.d/rc: line 77: 2444 Aborted $@
malloc: ../bash/dispose_cmd.c:241: assertion botched
free: start and end chunk sizes differ
Aborting.../etc/init.d/rc: line 77: 2451 Aborted $@
Starting DNS forwarder and DHCP server: dnsmasq (already running).
malloc: ../bash/dispose_cmd.c:241: assertion botched
nunits < 30
Aborting...
malloc: ../bash/subst.c:3092: assertion botched
free: start and end chunk sizes differ
Aborting...error: '/etc/init.d/rc' exited outside the expected code flow.
########################################################################
WARNING: Voyage Linux Auto-Install will start in 5 seconds. It will
erase your disk in /dev/hda. If you want to stop, please
press Ctrl+C now !!
########################################################################
unionfs: new lower inode mtime (bindex=1, name=rw)
umount: /tmp/root: not mounted
umount: /tmp/cf: not mounted
Press ENTER to continue to format flash memory on /dev/hda
The number of cylinders for this disk is set to 15624.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
The number of cylinders for this disk is set to 15624.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (1-15624, default 1): Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-15624, default 15624): Using default value 15624
Command (m for help): Partition number (1-4):
Command (m for help): The partition table has been altered!
Calling ioctl() to re-read partition table.
hda: hda1
hda: hda1
Syncing disks.
mke2fs 1.40-WIP (14-Nov-2006)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
499968 inodes, 999932 blocks
49996 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1027604480
31 block groups
32768 blocks per group, 32768 fragments per group
16128 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
Writing inode tables: 0/31 1/31 2/31 3/31 4/31 5/31 6/31 7/31 8/31 9/3110/3111/3112/3113/3114/3115/3116/3117/3118/3119/3120/3121/3122/3123/3124/3125/3126/3127/3128/3129/3130/31done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 25 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
tune2fs 1.40-WIP (14-Nov-2006)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Configuration details:
----------------------
Distribution directory: /tmp/root
Disk/Flash Device: /dev/hda
Installation Partition: /dev/hda1
Bootstrap Partition: /dev/hda1
Will be mounted on: /tmp/cf
Target system profile: ALIX
Target console: serial
Target baud rate: 38400
Bootstrap installer: grub
Bootstrap partition: /dev/hda1
Copying files .... done
Removing pcmcia from update-rc.d
Removing any system startup links for /etc/init.d/pcmcia ...
Removing dnsmasq.pxe.conf in /etc/dnsmasq.more.conf
copyfiles.sh script completed
########################################################################
Voyage Linux Auto-Install completes. The system will reboot in 5 secs.
If you want to stop, please press Ctrl+C now !!
########################################################################
INIT:
INIT: Se
malloc: ../bash/subst.c:6654: assertion botched
malloc: block on free list clobbered
Aborting...
malloc: ../../../bash/lib/sh/itos.c:50: assertion botched
malloc: block on free list clobbered
Aborting...
malloc: ../bash/subst.c:3010: assertion botched
malloc: block on free list clobbered
Aborting...
malloc: ../bash/unwind_prot.c:288: assertion botched
free: underflow detected; mh_nbytes out of range
Aborting...Stopping advanced IEEE 802.11 management: hostapd
malloc: ../bash/subst.c:7274: assertion botched
nunits < 30
Aborting.../lib/lsb/init-functions: line 135: 2560 Aborted $TPUT hpa 60 >/dev/null 2>&1
.
nocatsplash daemon disabled - read /etc/default/nocatsplash.
Stopping internet superserver: inetd
malloc: ../../../bash/lib/sh/stringvec.c:188: assertion botched
malloc: block on free list clobbered
Aborting.../etc/rc6.d/K20openbsd-inetd: line 44: 2564 Aborted start-stop-daemon --stop --quiet --pidfile /var/run/inetd.pid --oknodo
Stopping PPTP: pptpd.
Stopping rsync daemon: rsync
malloc: ../bash/parse.y:1399: assertion botched
malloc: block on free list clobbered
Aborting...Stopping OpenBSD Secure Shell server: sshd.
malloc: ../bash/unwind_prot.c:276: assertion botched
free: underflow detected; mh_nbytes out of range
Aborting...
malloc: ../bash/subst.c:3110: assertion botched
free: underflow detected; mh_nbytes out of range
Aborting...Stopping periodic command scheduler: crond
malloc: ../bash/subst.c:7274: assertion botched
nunits < 30
Aborting.../lib/lsb/init-functions: line 135: 2593 Aborted $TPUT setaf 1 >/dev/null 2>&1
.
Stopping watchdog daemon:
malloc: ../bash/variables.c:1922: assertion botched
free: start and end chunk sizes differ
Aborting.../etc/init.d/rc: line 77: 2596 Aborted $@
nocatsplash daemon disabled - read /etc/default/nocatsplash.
Stopping internet superserver: inetd.
Stopping PPTP: pptpd.
Stopping rsync daemon: rsync.
Stopping DNS forwarder and DHCP server: dnsmasq.
Stopping kernel log daemon: klogd.
Stopping system log daemon: syslogd.
Synchronizing /var/run ... unionfs: new lower inode mtime (bindex=1, name=var)
unionfs: new lower inode mtime (bindex=1, name=ro)
unionfs: new lower inode ctime (bindex=1, name=hostapd)
unionfs: new lower inode ctime (bindex=1, name=iptraf)
unionfs: new lower inode ctime (bindex=1, name=sshd)
Done.
Synchronizing /var/spool ... unionfs: new lower inode mtime (bindex=1, name=var)
unionfs: new lower inode mtime (bindex=1, name=spool)
unionfs: new lower inode ctime (bindex=1, name=crontabs)
unionfs: new lower inode ctime (bindex=1, name=cron)
Done.
Stopping advanced IEEE 802.11 management: hostapd.
nocatsplash daemon disabled - read /etc/default/nocatsplash.
Stopping internet superserver: inetd
malloc: ../bash/parse.y:1399: assertion botched
malloc: block on free list clobbered
Aborting...Stopping PPTP: pptpd.
Stopping rsync daemon: rsync.
malloc: ../bash/subst.c:633: assertion botched
malloc: block on free list clobbered
Aborting...error: '/etc/init.d/rc' exited outside the expected code flow.
Give root password for maintenance
(or type Control-D to continue):
malloc: ../bash/dispose_cmd.c:241: assertion botched
free: start and end chunk sizes differ
Aborting...Give root password for maintenance
(or type Control-D to continue):
malloc: ../bash/parse.y:4894: assertion botched
free: start and end chunk sizes differ
Aborting...Give root password for maintenance
(or type Control-D to continue):
malloc: ../bash/parse.y:4894: assertion botched
free: start and end chunk sizes differ
Aborting...Give root password for maintenance
(or type Control-D to continue):
malloc: ../bash/parse.y:4894: assertion botched
free: start and end chunk sizes differ
Aborting...Give root password for maintenance
(or type Control-D to continue):
malloc: ../bash/execute_cmd.c:2714: assertion botched
free: start and end chunk sizes differ
Aborting...Give root password for maintenance
(or type Control-D to continue):
Login incorrect.
Give root password for maintenance
(or type Control-D to continue):
Login incorrect.
Give root password for maintenance
(or type Control-D to continue):
Login incorrect.
Give root password for maintenance
(or type Control-D to continue): PC Engines ALIX.2 v0.99
640 KB Base Memory
15360
31744
48128
64512
80896
97280
113664
130048
146432
162816
179200
195584
211968
228352
244736
261120 KB Extended Memory
Waiting for HDD ...
01F0 Master 848A HMS360404D5CF00
Phys C/H/S 7936/16/63 Log C/H/S 992/128/63
GRUB Loading stage1.5.
GRUB loading, please wait...
[H[J
GNU GRUB version 0.97 (640K lower / 261120K upper memory)
[m[4;2H+-------------------------------------------------------------------------+[5;2H|[5;76H|[6;2H|[6;76H|[7;2H|[7;76H|[8;2H|[8;76H|[9;2H|[9;76H|[10;2H|[10;76H|[11;2H|[11;76H|[12;2H|[12;76H|[13;2H|[13;76H|[14;2H|[14;76H|[15;2H|[15;76H|[16;2H|[16;76H|[17;2H+-------------------------------------------------------------------------+[m
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, or 'c' for a command-line.[5;78H [m[7m[5;3H voyage-linux-01Jan00 [5;75H[m[m[6;3H [6;75H[m[m[7;3H [7;75H[m[m[8;3H [8;75H[m[m[9;3H [9;75H[m[m[10;3H [10;75H[m[m[11;3H [11;75H[m[m[12;3H [12;75H[m[m[13;3H [13;75H[m[m[14;3H [14;75H[m[m[15;3H [15;75H[m[m[16;3H [16;75H[m[16;78H [5;75H[23;4H The highlighted entry will be booted automatically in 5 seconds. [5;75H[23;4H The highlighted entry will be booted automatically in 4 seconds. [5;75H[23;4H The highlighted entry will be booted automatically in 3 seconds. [5;75H[23;4H The highlighted entry will be booted automatically in 2 seconds. [5;75H[23;4H The highlighted entry will be booted automatically in 1 seconds. [5;75H[H[J Booting 'voyage-linux-01Jan00'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz root=LABEL=ROOT_FS console=ttyS0,38400n8
[Linux-bzImage, setup=0x2800, size=0x14d9d8]
initrd /initrd.img
[Linux-initrd @ 0xfdc9000, 0x226bcf bytes]
Linux version 2.6.23-486-voyage (2.6.23-2) (root at punknix-uml) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Wed May 21 15:31:49 GMT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
256MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 65536
HighMem 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 65536
DMI not present or invalid.
Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: root=LABEL=ROOT_FS console=ttyS0,38400n8
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 498.047 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 254324k/262144k available (1808k kernel code, 7292k reserved, 640k data, 164k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffac000 - 0xfffff000 ( 332 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
.init : 0xc0368000 - 0xc0391000 ( 164 kB)
.data : 0xc02c4021 - 0xc036419c ( 640 kB)
.text : 0xc0100000 - 0xc02c4021 (1808 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 997.08 BogoMIPS (lpj=498544)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
geode: 8 MFGPT timers available.
PCI: PCI BIOS revision 2.10 entry at 0xfcd03, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
PCI: Probing PCI hardware
Time: tsc clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2202k freed
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
hda: HMS360404D5CF00, CFA DISK drive
Clocksource tsc unstable (delta = 131886587 ns)
Time: pit clocksource has been installed.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 7999488 sectors (4095 MB) w/128KiB Cache, CHS=7936/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
geode-aes: GEODE AES engine enabled.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 164k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
eth0: VIA Rhine III (Management Adapter) at 0xe0000000, 00:0d:b9:15:94:1c, IRQ 10.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link c5e1.
eth1: VIA Rhine III (Management Adapter) at 0xe0040000, 00:0d:b9:15:94:1d, IRQ 11.
eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth2: VIA Rhine III (Management Adapter) at 0xe0080000, 00:0d:b9:15:94:1e, IRQ 12.
eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Done.
egin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local-premount ...
Done.
Begin: Running /scripts/local-bottom ...
Done.
Done.
egin: Running /scripts/init-bottom ...
Done.
INIT: version 2.86 booting
malloc: ../bas
INIT: Entering runlevel: 2
malloc: ../bash/variables.c:1922: assertion botched
free: start and end chunk sizes differ
Aborting...
Debian GNU/Linux 4.0 (none) ttyS0
(none) login: root
Password:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
malloc: ../bash/unwind_prot.c:288: assertion botched
nunits < 30
Aborting...
malloc: ../bash/dispose_cmd.c:241: assertion botched
free: start and end chunk sizes differ
Aborting...
Debian GNU/Linux 4.0 (none) ttyS0
(none) login:
More information about the Voyage-linux
mailing list