[Voyage-linux] ALIX.2 Linux via_rhine ethernet interrupt problem

[Michal Mühlpachr]

Hi all,

I am using ALIX 2C3 with BIOS PC Engines ALIX.3 v0.99b

Linux 2.6.23 (Voyage 0.5.2) via_rhine driver seems has some
problems with eth1 and eth2 interrupt (eth0 works OK).

...
PCI: PCI BIOS revision 2.10 entry at 0xfcd03, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
...
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
eth0: VIA Rhine III (Management Adapter) at 0xe0000000,
00:0d:b9:15:9b:6c, IRQ 10.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
PCI: No IRQ known for interrupt pin A of device 0000:00:0a.0. Please
try using pci=biosirq.
eth1: VIA Rhine III (Management Adapter) at 0xe0040000,
00:0d:b9:15:9b:6d, IRQ 0.
eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
PCI: No IRQ known for interrupt pin A of device 0000:00:0b.0. Please
try using pci=biosirq.
eth2: VIA Rhine III (Management Adapter) at 0xe0080000,
00:0d:b9:15:9b:6e, IRQ 0.
eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.

pci=biosirq does not help.

cat /proc/interrupts
          CPU0
 0:     277703    XT-PIC-XT        timer
 2:          0    XT-PIC-XT        cascade
 4:        460    XT-PIC-XT        serial
 10:          0    XT-PIC-XT        eth0
 14:        828    XT-PIC-XT        ide0
 15:          1    XT-PIC-XT        ehci_hcd:usb1, ohci_hcd:usb2
NMI:          0
LOC:          0
ERR:          0
MIS:          0

Any ideas ?

Thank you in advance.

With Best Regards
Michal Mühlpachr