[Voyage-linux] Alix 3d3 serial port

[Kim-man 'Punky' TSE]

Hi,

If you do a standard voyage.update installation and selected ALIX 
profile, the serial port (dev/ttyS0) is assigned to the console terminal 
as defined in /etc/inittab.  ALIX has a DB9 connector and has another 
serial port via connector, you should makes use of the extra connector 
instead of the DB9 which serve the console terminal.

Regards,
Punky

Michele Petrazzo - Unipex wrote:
> Hi list,
> I want to use its the serial port of the alix 3d3 for talk with a modem,
> but simple "it not talk.". I remove all the "console redirections" on
> the bios, grub and kernel, but the same.
> On the instant that I connect the modem serial port to the alix, the
> "TR" led switch on and this indicate that "it's talking" I also tried
> with a simple usb to serial converter and in this case it work like
> perfectly, so the "TR" led switch on only when I start to talk with the
> modem (with minicom).
>
> Someone has already used that serial port for other use than console?
>
> Thanks,
> Michele
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux


-- 
Regards,
Punky

Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
  - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
  - Network Engineering, Development Platform and Consultation