[Voyage-linux] Problems with alix 2d3 and madwifi on voyage-current (lenny)

[Juergen Adolph]

Hello,

accurately the same hardware/config. accurately the same problem!

Cheers!

----- "Panagiotis Malakoudis" <malakudi at gmail.com> schrieb:

> I updated one of my ALIX 2D3 systems with voyage-current (lenny) and I
> keep getting messages like:
> wifi0: ath_bstuck_tasklet: Stuck beacon; resetting (beacon miss count:
> 11)
> or
> wifi0: ath_rxorn_tasklet: Receive FIFO overrun; resetting.
> and even this some times
> NETDEV WATCHDOG: wifi0: transmit timed out
> ------------[ cut here ]------------
> WARNING: at net/sched/sch_generic.c:223 dev_watchdog+0x8a/0xe2()
> [<c0113530>] warn_on_slowpath+0x40/0x65
> [<c0128b17>] tick_handle_periodic+0xc/0x55
> [<d0922b9c>] zz00050ae3+0xdc/0xf0 [ath_hal]
> [<d09a11b1>] ath_set_ack_bitrate+0x161/0x168 [ath_pci]
> [<d0989c13>] ath_reset+0x223/0x263 [ath_pci]
> [<c025872a>] dev_watchdog+0x0/0xe2
> [<c025872a>] dev_watchdog+0x0/0xe2
> [<c02587b4>] dev_watchdog+0x8a/0xe2
> [<c0119f2c>] run_timer_softirq+0xfc/0x15d
> [<c0116f73>] __do_softirq+0x35/0x75
> [<c0116fd5>] do_softirq+0x22/0x26
> [<c011713b>] irq_exit+0x25/0x5d
> [<c0104f35>] do_IRQ+0x50/0x60
> [<c0103973>] common_interrupt+0x23/0x30
> 
> I've read in some fora that this might be fixed if you build kernel
> and madwifi tools with latest gcc - 4.3.2 (it seems that current
> voyage kernel is built with gcc 4.1.2), so I am going to try that, but
> I first would like to know if any other people experience such kind of
> problems.
> I run my CM9 atheros card as an Access Point bridged with eth0, with
> WPA2-PSK.
> 
> I never had any such problems with voyage 0.5.2 in this configuration.
> 
> 
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux

-- 
Juergen Adolph
----------------------------------------------------------------------------
PGP-KeyID: 0x4A77083A