[Voyage-linux] Documentation for madwifi in voyage 0.6.0 lenny release

[Kim-man 'Punky' TSE]

Hi Ian,

Since you don't mention running AP mode or STA mode, I suppose you are 
talking about STA.  I follow exactly the same the wiki page described 
and I can use wpa_supplicant on voyage 0.6.1 (pre) to connect to 
associate to my home server running hostapd w/ WPA.

Here is my wpa_supplicant config:

voyage:~# cat /etc/wpa_supplicant.conf
network={
        ssid="voyage-wds"
        psk=76ab47787aa8b560895f617dd351ad9d32faa86232f5366b6554832073d07481
    key_mgmt=WPA-PSK
    proto=WPA
#   proto=RSN
}

Ian Holm wrote:
> Is there any kind of guide for setting up wireless for atheros 5212 
> cards in 0.6.0? I got wireless working just fine in 0.5.2 using this 
> wiki page.
>
> http://madwifi-project.org/wiki/UserDocs/FirstTimeHowTo
>
> But it seems that a lot of things have changed since the 2.6.23 kernel 
> and I can't get it to work. I've read through the README and followed 
> the instructions for uncommenting the lines in 
> /etc/network/interfaces. Is there anything else I need to do? The 
> README doesn't specify how to setup ath0 using dhcp or wpa encryption. 
> Any help would be appreciated.
> ------------------------------------------------------------------------
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>   


-- 
Regards,
Punky

Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
  - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
  - Network Engineering, Development Platform and Consultation