[Voyage-linux] Question about autoloading USB-devices

[Punky Tse]

Hi Andrey,

I try to repeat your cast but no avail.
See my dmesg grep below:
=========================================
voyage:~# dmesg|egrep "ftdi|tty"
[    0.000000] Kernel command line: 
root=UUID=92596085-f0a4-42cf-84ba-d9a03e8e4c00 ro  console=ttyS0,38400n8
[    0.000999] console [ttyS0] enabled
[    2.198492] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   14.833820] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
[   14.834820] ftdi_sio: Detected FT232RL
[   14.835820] usb 2-1: FTDI USB Serial Device converter now attached to 
ttyUSB0
[   14.836820] usbcore: registered new interface driver ftdi_sio
[   14.837820] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
voyage:~# ls -la /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 Jan  1  2000 /dev/ttyUSB0
=========================================

Regards,
Punky


Andrey Kaplun wrote:
>  
> Hello
>  
> Someone knows why if I start Voyage of with pluged USB-device (FTDI Of 
> serial converter) the linux message:
> "ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected 
> from ttyUSB0
> ftdi_sio 2-2.4:1.0: device disconnected".
> And /dev/ttyUSB0 not of created. But if I reconnect device (the of 
> voyage is of already of loaded) the /dev/ttyUSB0 is created successfully.
> How to make so that during the reloading it would not be necessary to 
> disconnect and connected USB-devices manualy?
>  
> Best Regards,
> Andrey Kaplun
> ------------------------------------------------------------------------
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>