[Voyage-linux] booting failure

[Punky Tse]

Hi,

Please see this:

http://linux.voyage.hk/?q=node/29
http://linux.voyage.hk/?q=node/30

You need the latest TinyBIOS and disable MFGPT workaround.

Regards,
Punky

Piotr Mitoraj wrote:
> Hi,
> I've been using Voyage 0.4 on alix3c1 for a year by now. No major 
> issues so far.
> Recently I decided to try out the latest stable version 0.6. 
> Unfortunately it fails to boot. I am using 1GB CF card flashed through 
> voyage.update script on xubuntu 8.10 with usb card reader.
> Booting freezes in the same place with voyage 5.2, voyage 0.6 and 
> voyage current.
>
> Any help or pointers to solve this issue would be very appreciated.
>
>
> Regards,
> Piotr
>
>
> Below I attach the output I get after the grub menu:
>
>
>   Booting 'voyage-linux-19Jan09'
>
> root (hd0,0)
>  Filesystem type is ext2fs, partition type 0x83
> kernel /vmlinuz root=LABEL=ROOT_FS  console=ttyS0,38400n8
>    [Linux-bzImage, setup=0x2c00, size=0x1575d0]
> initrd /initrd.img
>    [Linux-initrd @ 0x7dd2000, 0x21d9e4 bytes]
>
> Linux version 2.6.26-486-voyage (2.6.26) (root at punknix-uml) (gcc 
> version 4.1.2 9
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
>  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 128MB LOWMEM available.
> Zone PFN ranges:
>   DMA             0 ->     4096
>   Normal       4096 ->    32768
>   HighMem     32768 ->    32768
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
>     0:        0 ->    32768
> DMI not present or invalid.
> Allocating PCI resources starting at 10000000 (gap: 08000000:f7f00000)
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 
> 32512
> Kernel command line: root=LABEL=ROOT_FS  console=ttyS0,38400n8
> No local APIC present or hardware disabled
> Initializing CPU#0
> PID hash table entries: 512 (order: 9, 2048 bytes)
> Detected 431.649 MHz processor.
> Console: colour dummy device 80x25
> console [ttyS0] enabled
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Memory: 124324k/131072k available (1769k kernel code, 6208k reserved, 
> 664k data)
> virtual kernel memory layout:
>     fixmap  : 0xfffac000 - 0xfffff000   ( 332 kB)
>     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>     vmalloc : 0xc8800000 - 0xff7fe000   ( 879 MB)
>     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
>       .init : 0xc0364000 - 0xc03a5000   ( 260 kB)
>       .data : 0xc02ba572 - 0xc0360638   ( 664 kB)
>       .text : 0xc0100000 - 0xc02ba572   (1769 kB)
> Checking if this processor honours the WP bit even in supervisor 
> mode...Ok.
> Calibrating delay using timer specific routine.. 864.39 BogoMIPS 
> (lpj=432199)
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
> CPU: L2 Cache: 128K (32 bytes/line)
> CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
> Checking 'hlt' instruction... OK.
> Freeing SMP alternatives: 0k freed
> net_namespace: 628 bytes
> NET: Registered protocol family 16
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux