[Voyage-linux] wireless client (usb wireless) - only working if network plugged in

[Jordi Soucheiron]

Hi Thomas,
To debug it you could connect to the console using a serial cable and
exec route and ifconfig. You may find something useful.

2009/6/7 Thomas Stranzl <mahatmah at gmx.net>:
> Hi,
>
> I=EC=E9e voyage on an Alix board (development version). Connecting over e=
th0 works perfect (if a cable is plugged in, of course :)
> I=EC=E9e bought a Belkin wireless usb stick (as I couldn=90=D4 wait a few=
 days for delivering of a mini-pci card...). I recompiled the kernel with t=
he additional driver, and changed /etc/network/interfaces to the following:
>
> auto lo
> iface lo inet loopback
>
> auto eth0
> #iface eth0 inet dhcp
> iface eth0 inet static
>        address 192.168.1.49
>        netmask 255.255.255.0
>        gateway 192.168.1.1
>
> auto wlan0
> iface wlan0 inet dhcp
>        wpa-ssid myESSID
>        wpa-psk myPASS
>
> after booting with eth0 connected, it connects to the access point automa=
tically. SSHing to the acquired dhcp address works.
>
> Now - if I have no wire plugged into eth0 - my router shows, that a clien=
t has requested a ip address (and it is shown under connected hosts..), but=
 I could neither ssh into or ping the Alix board anymore.
>
> Any ideas what=E3=B8 going on there?
> best,
> Thomas
> --
> GMX FreeDSL mit DSL 6.000 Flatrate und Telefonanschluss nur 17,95 Euro/mt=
l.!
> http://dslspecial.gmx.de/freedsl-aktionspreis/?ac=3DOM.AD.PD003K11308T456=
9a
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>



--=20
Jordi Soucheiron
Software Engineer

DEXMA
Parc Tecnol=A8=B0gic la Salle
Sant Joan de la Salle, 42
08022 Barcelona
t/f: [+34] 93 181 01 95
www.dexmatech.com
jsoucheiron at dexmatech.com