[Voyage-linux] R6040 Support in Voyage 6.1

[Kim-man 'Punky' TSE]

Hi Max,

ide1 occupied the irq15 which is required for eth0.

from 0.6.1 dmesg:
=============
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing 
all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
=============

0.5.2 kernel parameters
Kernel command line: initrd=initrd.gz boot=casper console=tty0 
root=/dev/hdb BOOT_IMAGE=vmlinuz

0.6.1 kernel parameters
Kernel command line: initrd=initrd1.img boot=live root=/dev/hdb 
noautologin noxautologin nouser debug all_generic_ide nolocales 
username=root hostname=voyage union=aufs BOOT_IMAGE=vmlinuz1
 
It seems all_generic_ide is causing this.  Unless you can find way to 
edit /isolinux/menu.cfg in the CD to remove "all_generic_id".  I found 
no other way to disable all_generic_ide.

Regards,
Punky



Max Bridgewater wrote:
> Hey Punky,
>
> Here are the logs for Voyage 0.5.2. Let me know if can otherwise help.
>
> Regards,
> max.
>
> On Wed, Jun 24, 2009 at 3:15 AM, Kim-man 'Punky' TSE 
> <punkytse at punknix.com <mailto:punkytse at punknix.com>> wrote:
>
>     Hi Max,
>
>     So it most probably relates to a problem in r6040 driver of the
>     2.6.26 kernel.   If you switched to 0.5.2, please post the output
>     of dmesg, lspci -v, cat /proc/interrupts and ifconfig -a.
>
>
>     Regards,
>     Punky
>


-- 
Regards,
Punky

Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
  - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
  - Network Engineering, Development Platform and Consultation