[Voyage-linux] Re: Wifi trouble: rt73usb gets DHCP assigned but link is 'Not-Associated'

[Solomon Asare]

Hi,
do you have to use 0.6? Maybe 0.5 will solve your problem, why not give it a try?

Solomon.


--- On Tue, 30/6/09, rodney at optimail.com.au <rodney at optimail.com.au> wrote:

> From: rodney at optimail.com.au <rodney at optimail.com.au>
> Subject: [Voyage-linux] Re: Wifi trouble: rt73usb gets DHCP assigned but link is 'Not-Associated'
> To: voyage-linux at voyage.hk
> Date: Tuesday, 30 June, 2009, 12:40 PM
> Hi Solomon,
> 
>  scanning works OK; the local AP is found, along with a
> more distant one.
>  This is mysterious, as nearly everything is working. Even
> the routing
>  is automatically setup correctly.
> 
> Rodney
> 
> voyage:~# route
> Kernel IP routing table
> Destination     Gateway   
>      Genmask     
>    Flags Metric Ref    Use Iface
> 192.168.1.0     *     
>      
>    255.255.255.0   U 
>    0      0   
>     0 wlan0
> default     
>    192.168.1.1 
>    0.0.0.0     
>    UG    0     
> 0        0 wlan0
> 
> voyage:~# iwlist wlan0 scan
> wlan0     Scan completed :
>           Cell 01 - Address:
> 00:03:C9:D2:25:F2
>                
>     ESSID:"earth"
>                
>     Mode:Master
>                
>     Channel:1
>                
>     Frequency:2.412 GHz (Channel 1)
>                
>     Quality=49/100  Signal level=-62 dBm
>                
>     Encryption key:on
>                
>     Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s;
> 18 Mb/s
>                
>               24 Mb/s; 36
> Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
>                
>               12 Mb/s; 48
> Mb/s
>                
>     Extra:tsf=0000003a76f71c60
>           Cell 02 - Address: 
> ...
> 
> 
> 
> > Date: Mon, 29 Jun 2009 02:15:13 -0700 (PDT)
> > From: Solomon Asare <solomonasare at yahoo.com>
> > Subject: Re: [Voyage-linux] Wifi trouble: rt73usb gets
> DHCP assigned
> >     but link    is
> 'Not-Associated'
> > To: voyage-linux at voyage.hk
> > Message-ID: <447783.22508.qm at web31601.mail.mud.yahoo.com>
> > Content-Type: text/plain; charset=utf-8
> >
> >
> > Hi Rodney,
> > I haven't used D-Link DWL-G122 before but just wanted
> to ask if you see
> > the Access Point when you scan wlan0 with the command
> "iwlist wlan0 scan"?
> >
> > Regards,
> > solomon.
> >
> >
> >
> > --- On Sun, 28/6/09, rodney at optimail.com.au
> <rodney at optimail.com.au>
> > wrote:
> >
> >> From: rodney at optimail.com.au
> <rodney at optimail.com.au>
> >> Subject: [Voyage-linux] Wifi trouble: rt73usb gets
> DHCP assigned but
> >> link is 'Not-Associated'
> >> To: voyage-linux at voyage.hk
> >> Date: Sunday, 28 June, 2009, 2:14 AM
> >> Hello,
> >>
> >>  using a D-Link DWL-G122 rev c1, Ralink
> chipset, voyage
> >> 0.6.1:
> >> The ALIX 1c is client for wifi, using DHCP.
> >>
> >> I'm getting the beginning of a link, DHCP address
> assigned,
> >> routes added,
> >>  but iwconfig reports Not-Associated. Tried
> with WEP and
> >> without WEP.
> >>  Open authentication, no MAC filter.
> >>
> >>  Plugging the device into my ubuntu 8.10 PC,
> there is no
> >> trouble.
> ..
> 
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>