[Voyage-linux] Alix boards hang at boot time

[Punky Tse]

Hi all,

Please refer to http://www.pcengines.ch/pdf/alix2.pdf, page 11 & 12 if 
you got any hint.  Also provide further information if you are using one 
radio or two radio.

Or consult Pascal of PCEngines or routerboards if R52 is 
supported/certified on  ALIX boards.  Thanks

Regards,
Punky

Jordi Soucheiron wrote:
> Hi,
> I've tried with a 18W power supply and the board still hangs.
> Thomas are you using a Mikrotik R52 minipci board too?
> Any other ideas?
>
> 2009/3/20 Kim-man 'Punky' TSE <punkytse at punknix.com>:
>   
>> Hi,
>>
>> What I can suggest is to switch to a PSU with higher power (>15W) to see if
>> it could improve.
>>
>> Regards,
>> Punky
>>
>>
>> Jordi Soucheiron wrote:
>>     
>>> Hello everybody,
>>> I've been using voyage in alix boards for a few weeks now. Everything
>>> works flawlessly but a random problem booting the device. The board
>>> hungs after printing the line: [    0.108983] PCI: Probing PCI
>>> hardware
>>> I don't really know what can cause this. The only way I've found to
>>> solve it is to reboot the board
>>> Does somebody know what can cause this? I'm using a Mikrotik
>>> RouterBoard R52 Minipci wifi card and this has happened in both alix
>>> 6b2 and alix 3d2.
>>> Thank you
>>>
>>>
>>>       
>> --
>> Regards,
>> Punky
>>
>> Voyage Solutions (http://solution.voyage.hk)
>> * Embedded Solutions and Systems
>>  - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
>>  - Network Engineering, Development Platform and Consultation
>>
>>
>>
>>     
>
>
>
>