[Voyage-linux] ALi M5281 Serial ATA / RAID host controller

Roberto de Matos (spam-protected)
Thu Oct 1 13:45:02 HKT 2009


Hi!

	I'm playing with Nano-lx-800 and Voyage linux. Until now, everything was OK, 
but I plugged a 1TB SATA HD at the board and it didn't show up in /dev/sda 
(for example). 

	The host controller is ALi M5281 Serial ATA / RAID. Could anyone help me??

	More information about my system is attached.

Thank you,

Roberto de Matos



-------------- next part --------------
# uname -a
Linux voyage 2.6.30-486-voyage #1 PREEMPT Tue Aug 18 15:37:39 GMT 2009 i586 GNU/Linux

-------------------------------------------------------------------------------------------------------------------------

# dmesg
]   #3 [000009c000 - 0000100000]    BIOS reserved ==> [000009c000 - 0000100000]
[    0.000000]   #4 [00004c6000 - 00004c806e]              BRK ==> [00004c6000 - 00004c806e]
[    0.000000]   #5 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #6 [0000011000 - 0000013000]          BOOTMAP ==> [0000011000 - 0000013000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0000f7b0
[    0.000000]   HighMem  0x0000f7b0 -> 0x0000f7b0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009c
[    0.000000]     0: 0x00000100 -> 0x0000f7b0
[    0.000000] On node 0 totalpages: 63292
[    0.000000] free_area_init_node: node 0, pgdat c04353b0, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3948 pages, LIFO batch:0
[    0.000000]   Normal zone: 464 pages used for memmap
[    0.000000]   Normal zone: 58848 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x9c10
[    0.000000] No local APIC present or hardware disabled
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 10000000 (gap: f7c0000:f0830000)
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 62796
[    0.000000] Kernel command line: root=LABEL=ROOT_FS 
[    0.000000] Initializing CPU#0
[    0.000000] NR_IRQS:288
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 497.954 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000999] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000999] Initializing HighMem for node 0 (00000000:00000000)
[    0.000999] Memory: 244340k/253632k available (2352k kernel code, 8616k reserved, 966k data, 348k init, 0k highmem)
[    0.000999] virtual kernel memory layout:
[    0.000999]     fixmap  : 0xfffa9000 - 0xfffff000   ( 344 kB)
[    0.000999]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000999]     vmalloc : 0xcffb0000 - 0xff7fe000   ( 760 MB)
[    0.000999]     lowmem  : 0xc0000000 - 0xcf7b0000   ( 247 MB)
[    0.000999]       .init : 0xc0440000 - 0xc0497000   ( 348 kB)
[    0.000999]       .data : 0xc034c0f0 - 0xc043dc34   ( 966 kB)
[    0.000999]       .text : 0xc0100000 - 0xc034c0f0   (2352 kB)
[    0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.001019] Calibrating delay loop (skipped), value calculated using timer frequency.. 995.90 BogoMIPS (lpj=497954)
[    0.001383] Mount-cache hash table entries: 512
[    0.001836] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[    0.001922] CPU: L2 Cache: 128K (32 bytes/line)
[    0.002034] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
[    0.002204] Checking 'hlt' instruction... OK.
[    0.006131] ACPI: Core revision 20090320
[    0.018651] ACPI: setting ELCR to 0200 (from 0800)
[    0.020531] net_namespace: 968 bytes
[    0.021650] NET: Registered protocol family 16
[    0.021763] geode-mfgpt:  0 MFGPT timers available.
[    0.021835] mfgpt-timer:  Could not allocate a MFPGT timer
[    0.022908] EISA bus registered
[    0.023026] ACPI: bus type pci registered
[    0.024966] PCI: PCI BIOS revision 2.10 entry at 0xfa480, last bus=0
[    0.025005] PCI: Using configuration type 1 for base access
[    0.033747] bio: create slab <bio-0> at 0
[    0.038488] ACPI: EC: Look up EC in DSDT
[    0.065629] ACPI: Interpreter enabled
[    0.065714] ACPI: (supports S0 S1 S5)
[    0.066012] ACPI: Using PIC for interrupt routing
[    0.099525] ACPI: No dock devices found.
[    0.099654] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.100430] pci 0000:00:01.0: reg 10 io port: [0xac1c-0xac1f]
[    0.100542] pci 0000:00:01.0: reg 14 io port: [0x9e00-0x9e07]
[    0.101468] pci 0000:00:01.1: reg 10 32bit mmio: [0xee000000-0xeeffffff]
[    0.101593] pci 0000:00:01.1: reg 14 32bit mmio: [0xefff0000-0xefff3fff]
[    0.101717] pci 0000:00:01.1: reg 18 32bit mmio: [0xeffec000-0xeffeffff]
[    0.101841] pci 0000:00:01.1: reg 1c 32bit mmio: [0xeffe8000-0xeffebfff]
[    0.101965] pci 0000:00:01.1: reg 20 32bit mmio: [0xefff8000-0xefffbfff]
[    0.102647] pci 0000:00:01.2: reg 10 32bit mmio: [0xefff4000-0xefff7fff]
[    0.103580] pci 0000:00:0e.0: reg 10 io port: [0xf600-0xf6ff]
[    0.103608] pci 0000:00:0e.0: reg 14 32bit mmio: [0xeffff000-0xeffff0ff]
[    0.103670] pci 0000:00:0e.0: supports D1 D2
[    0.103689] pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold
[    0.103775] pci 0000:00:0e.0: PME# disabled
[    0.104137] pci 0000:00:0f.0: reg 10 io port: [0x6000-0x6007]
[    0.104251] pci 0000:00:0f.0: reg 14 io port: [0x6100-0x61ff]
[    0.104364] pci 0000:00:0f.0: reg 18 io port: [0x6200-0x623f]
[    0.104480] pci 0000:00:0f.0: reg 1c io port: [0x00-0x1f]
[    0.104595] pci 0000:00:0f.0: reg 20 io port: [0x9d00-0x9d7f]
[    0.104715] pci 0000:00:0f.0: reg 24 io port: [0x9c00-0x9c3f]
[    0.105615] pci 0000:00:0f.2: reg 20 io port: [0xff00-0xff0f]
[    0.106279] pci 0000:00:0f.3: reg 10 io port: [0xfe00-0xfe7f]
[    0.107476] pci 0000:00:0f.4: reg 10 32bit mmio: [0xefffe000-0xefffefff]
[    0.108350] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[    0.108483] pci 0000:00:0f.4: PME# disabled
[    0.109140] pci 0000:00:0f.5: reg 10 32bit mmio: [0xefffd000-0xefffdfff]
[    0.110018] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[    0.110148] pci 0000:00:0f.5: PME# disabled
[    0.110387] pci 0000:00:11.0: reg 10 io port: [0xfd00-0xfd07]
[    0.110413] pci 0000:00:11.0: reg 14 io port: [0xfc00-0xfc03]
[    0.110440] pci 0000:00:11.0: reg 18 io port: [0xfb00-0xfb07]
[    0.110466] pci 0000:00:11.0: reg 1c io port: [0xfa00-0xfa03]
[    0.110493] pci 0000:00:11.0: reg 20 io port: [0xf900-0xf90f]
[    0.110524] pci 0000:00:11.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[    0.110595] pci_bus 0000:00: on NUMA node 0
[    0.110630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.128735] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 *11)
[    0.130079] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[    0.131266] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled.
[    0.132656] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[    0.134523] SCSI subsystem initialized
[    0.135290] PCI: Using ACPI for IRQ routing
[    0.136559] pnp: PnP ACPI init
[    0.136657] ACPI: bus type pnp registered
[    0.141841] pnp 00:02: io resource (0x10-0x1f) overlaps 0000:00:0f.0 BAR 3 (0x0-0x1f), disabling
[    0.164558] pnp: PnP ACPI: found 17 devices
[    0.164640] ACPI: ACPI bus type pnp unregistered
[    0.164757] system 00:00: iomem range 0xcd400-0xcffff has been reserved
[    0.164846] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[    0.164935] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[    0.165042] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[    0.165135] system 00:00: iomem range 0xf7b0000-0xf7bffff could not be reserved
[    0.165235] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[    0.165325] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.165413] system 00:00: iomem range 0x100000-0xf7affff could not be reserved
[    0.165512] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.165632] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.165719] system 00:02: ioport range 0x294-0x297 has been reserved
[    0.202190] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.202213] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.202478] NET: Registered protocol family 2
[    0.203137] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.205003] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.205298] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.205515] TCP: Hash tables configured (established 8192 bind 8192)
[    0.205597] TCP reno registered
[    0.205963] NET: Registered protocol family 1
[    0.206285] Trying to unpack rootfs image as initramfs...
[    0.703042] Switched to high resolution mode on CPU 0
[    0.790185] Freeing initrd memory: 2517k freed
[    0.795631] microcode: CPU0: AMD CPU family 0x5 not supported
[    0.795715] Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[    0.798664] msgmni has been set to 482
[    0.800242] alg: No test for stdrng (krng)
[    0.800352] io scheduler noop registered
[    0.800422] io scheduler anticipatory registered
[    0.800494] io scheduler deadline registered
[    0.800621] io scheduler cfq registered (default)
[    0.800770] pci 0000:00:01.1: Boot video device
[    0.814122] input: Power Button as /class/input/input0
[    0.814206] ACPI: Power Button [PWRF]
[    0.815124] input: Power Button as /class/input/input1
[    0.815201] ACPI: Power Button [PWRB]
[    0.815700] input: Sleep Button as /class/input/input2
[    0.816060] ACPI: Sleep Button [SLPB]
[    0.816730] processor ACPI_CPU:00: registered as cooling_device0
[    1.006528] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.251198] serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
[    1.496196] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.741192] serial8250: ttyS3 at I/O 0x2e8 (irq = 10) is a 16550A
[    1.743518] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.745134] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.746898] 00:0d: ttyS0 at I/O 0x3f8 (irq = 5) is a 16550A
[    1.748516] 00:0e: ttyS3 at I/O 0x2e8 (irq = 10) is a 16550A
[    1.750130] 00:0f: ttyS2 at I/O 0x4e0 (irq = 10) is a 16550A
[    1.751645] serial 00:10: disabled
[    1.758320] brd: module loaded
[    1.758395] Uniform Multi-Platform E-IDE driver
[    1.758791] ide-gd driver 1.18
[    1.759142] Driver 'sd' needs updating - please use bus_type methods
[    1.759818] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.763165] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.763255] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.764534] mice: PS/2 mouse device common for all mice
[    1.765482] EISA: Probing bus 0 at eisa.0
[    1.765711] cpuidle: using governor ladder
[    1.765784] cpuidle: using governor menu
[    1.768577] TCP cubic registered
[    1.768649] NET: Registered protocol family 17
[    1.769201] RPC: Registered udp transport module.
[    1.769275] RPC: Registered tcp transport module.
[    1.769397] Using IPI Shortcut mode
[    1.771634] Freeing unused kernel memory: 348k freed
[    1.785429] input: AT Translated Set 2 keyboard as /class/input/input3
[    2.413405] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[    6.189047] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    6.189215] 8139cp 0000:00:0e.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    7.207112] amd74xx 0000:00:0f.2: UDMA100 controller
[    7.207208] amd74xx 0000:00:0f.2: IDE controller (0x1022:0x209a rev 0x01)
[    7.207429] amd74xx 0000:00:0f.2: IDE port disabled
[    7.207625] amd74xx 0000:00:0f.2: not 100% native mode: will probe irqs later
[    7.207740]     ide0: BM-DMA at 0xff00-0xff07
[    7.207822] Probing IDE interface ide0...
[    7.231054] 8139too Fast Ethernet driver 0.9.28
[    7.235336] usbcore: registered new interface driver usbfs
[    7.235554] usbcore: registered new interface driver hub
[    7.235741] usbcore: registered new device driver usb
[    7.255432] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.329756] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.737066] hdb: SanDisk SDCFB-512, CFA DISK drive
[    7.737312] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO2
[    7.737506] hdb: MWDMA2 mode selected
[    7.737789] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    7.744617] hdb: max request size: 128KiB
[    7.744701] hdb: 1000944 sectors (512 MB) w/1KiB Cache, CHS=993/16/63
[    7.745038]  hdb: hdb1
[    7.754462] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
[    7.754564] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    7.754650] PCI: setting IRQ 11 as level-triggered
[    7.754678] 8139too 0000:00:0e.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    7.756760] eth0: RealTek RTL8139 at 0xd007c000, 00:08:9b:6a:a6:43, IRQ 11
[    7.756845] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    7.757128] ehci_hcd 0000:00:0f.5: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    7.757291] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[    7.757332] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[    7.757576] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[    7.778283] ehci_hcd 0000:00:0f.5: irq 11, io mem 0xefffd000
[    7.784072] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[    7.784827] usb usb1: configuration #1 chosen from 1 choice
[    7.785108] hub 1-0:1.0: USB hub found
[    7.785205] hub 1-0:1.0: 4 ports detected
[    7.787440] ohci_hcd 0000:00:0f.4: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    7.787628] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[    7.787669] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[    7.787878] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[    7.788066] ohci_hcd 0000:00:0f.4: irq 11, io mem 0xefffe000
[    7.845758] usb usb2: configuration #1 chosen from 1 choice
[    7.846095] hub 2-0:1.0: USB hub found
[    7.846199] hub 2-0:1.0: 4 ports detected
[    8.097757] libata version 3.00 loaded.
[   10.423778] udevd version 125 started
[   16.350506] input: PC Speaker as /class/input/input5
[   17.501930] cs5535_gpio: base=0x6100 mask=0xb003c66 major=253
[   17.522447] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   17.522550] Geode LX AES 0000:00:01.2: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[   21.360644] geode-aes: GEODE AES engine enabled.
[   21.635864] AMD Geode RNG detected
[   21.710915] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[   21.711045] cs5535audio 0000:00:0f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   21.711220] cs5535audio 0000:00:0f.3: setting latency timer to 64
[   24.525083] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[   24.525096]   originally by Donald Becker <becker at scyld.com>
[   24.525107]   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[   24.593977] lib80211: common routines for IEEE802.11 drivers
[   24.594105] lib80211_crypt: registered algorithm 'NULL'
[   25.068997] geodewdt:  No timers were available
[   25.314903] leds_alix2: forced to skip BIOS test, assume system has ALIX.2 style LEDs
[   25.315304] Registered led device: alix:1
[   25.315450] Registered led device: alix:2
[   25.315595] Registered led device: alix:3
[   27.904362] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   29.196742] NET: Registered protocol family 10
[   29.199547] lo: Disabled Privacy Extensions
[   39.984043] eth0: no IPv6 routers present

-------------------------------------------------------------------------------------------------------------------------

# lspci -v
00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 30)
	Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge
	Flags: bus master, 66MHz, medium devsel, latency 248
	I/O ports at ac1c [size=4]
	I/O ports at 9e00 [size=8]

00:01.1 VGA compatible controller: Advanced Micro Devices [AMD] Geode LX Video (prog-if 00 [VGA controller])
	Subsystem: Advanced Micro Devices [AMD] Geode LX Video
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
	Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
	Memory at efff0000 (32-bit, non-prefetchable) [size=16K]
	Memory at effec000 (32-bit, non-prefetchable) [size=16K]
	Memory at effe8000 (32-bit, non-prefetchable) [size=16K]
	Memory at efff8000 (32-bit, non-prefetchable) [size=16K]
	Kernel modules: lxfb

00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block
	Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
	Memory at efff4000 (32-bit, non-prefetchable) [size=16K]
	Kernel driver in use: Geode LX AES
	Kernel modules: geode-rng, geode-aes

00:0d.0 ISA bridge: Integrated Technology Express, Inc. IT8888F PCI to ISA Bridge with SMB (rev 03)
	Flags: bus master, medium devsel, latency 0

00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at f600 [size=256]
	Memory at effff000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
	Kernel driver in use: 8139too
	Kernel modules: 8139cp, 8139too

00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 02)
	Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA
	Flags: 66MHz, medium devsel
	I/O ports at 6000 [size=8]
	I/O ports at 6100 [size=256]
	I/O ports at 6200 [size=64]
	I/O ports at 1000 [size=32]
	I/O ports at 9d00 [size=128]
	I/O ports at 9c00 [size=64]
	Kernel modules: cs5535_gpio

00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) (prog-if 80 [Master])
	Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE
	Flags: bus master, 66MHz, medium devsel, latency 248
	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	I/O ports at ff00 [size=16]
	Kernel driver in use: AMD_IDE
	Kernel modules: amd74xx, cs5536

00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01)
	Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
	I/O ports at fe00 [size=128]
	Kernel driver in use: cs5535audio
	Kernel modules: snd-cs5535audio

00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02) (prog-if 10 [OHCI])
	Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
	Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [40] Power Management version 2
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02) (prog-if 20 [EHCI])
	Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
	Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [40] Power Management version 2
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:11.0 Mass storage controller: ALi Corporation ALi M5281 Serial ATA / RAID Host Controller (rev a4) (prog-if 85)
	Subsystem: ALi Corporation ALi M5281 Serial ATA / RAID Host Controller
	Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 11
	I/O ports at fd00 [size=8]
	I/O ports at fc00 [size=4]
	I/O ports at fb00 [size=8]
	I/O ports at fa00 [size=4]
	I/O ports at f900 [size=16]
	[virtual] Expansion ROM at 10000000 [disabled] [size=64K]

-------------------------------------------------------------------------------------------------------------------------
# lsmod
Module                  Size  Used by
ipv6                  207280  14 
ledtrig_netdev          4216  0 
ledtrig_timer           2548  0 
ledtrig_heartbeat       1768  0 
leds_alix2              2240  0 
led_class               3428  1 leds_alix2
geodewdt                3964  0 
scx200_acb              4172  0 
hwmon_vid               2116  0 
lm90                   13344  0 
i2c_core               17524  2 scx200_acb,lm90
hostap_pci             42112  0 
hostap                 85020  1 hostap_pci
lib80211                4804  2 hostap_pci,hostap
natsemi                23216  0 
snd_cs5535audio        10244  0 
geode_rng               1596  0 
rng_core                3444  1 geode_rng
snd_ac97_codec         91512  1 snd_cs5535audio
ac97_bus                1308  1 snd_ac97_codec
ecb                     2328  0 
snd_pcm                57496  2 snd_cs5535audio,snd_ac97_codec
snd_timer              16320  1 snd_pcm
snd                    43184  4 snd_cs5535audio,snd_ac97_codec,snd_pcm,snd_timer
cs5535_gpio             3744  0 
geode_aes               5180  0 
soundcore               5228  1 snd
snd_page_alloc          7224  2 snd_cs5535audio,snd_pcm
pcspkr                  2004  0 
ata_generic             4284  0 
libata                137724  1 ata_generic
ide_pci_generic         3576  0 
cs5536                  3760  0 
ohci_hcd               20008  0 
ehci_hcd               29084  0 
8139too                21056  0 
amd74xx                 5336  1 
usbcore               112064  3 ohci_hcd,ehci_hcd
8139cp                 17112  0 
mii                     3900  2 8139too,8139cp


More information about the Voyage-linux mailing list