[Voyage-linux] not all html pages are routed

[Kim-man 'Punky' TSE]

Hi,

Try checking /etc/resolv.conf of the running 0.5.2 and 0.6.2.  On 0.6.2, 
you may need to install resolvconf package.

Regards,
Punky


Torsten Senf wrote:
> Hi,
>
> i used voyage linux 0.5.2 for a while. I used the
> distribution on an alix 2d3 board. The hardware with the software works
> as a router. Behind the router is one client with debian (lenny) os. On
> the router i have only two eth[01] interfaces working. eth0 connects to the
> client, eth1 connects to the internet. I have my own firewall rules with
> iptables. Everything worked fine.
>
> Now I installed the 0.6.2 version of voyage on an other CF-Card. I use the old 
> /etc/network/interfaces file, the old ppp-peer file and also my old
> firewall skript from 0.5.2 for the 0.6.2 distribution. It seems that
> everything work, but not all html sites where routed to the client. 
> I mean I can't browse every page from the client with firefox. 
> The most pages are working but not all e.g. www.mdr.de not
> work. I installed w3m on the router and from the router i get all html
> pages. When i boot windows on the client host, the same effect
> appear, not all pages can be browsed from the client. All other network
> protocols are correct working. 
>
> Any ideas how can I solve the problem??
>
> Greetings
> --
> Torsten Senf
> http://sentor.de
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>   


-- 
Regards,
Punky

Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
  - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
  - Network Engineering, Development Platform and Consultation