[Voyage-linux] VL 0.5 can boot successfully both on PC as well on my Embedded-SBC

[Kim-man 'Punky' TSE]

  Hi,

 From getting started/README, section 6.4, you should try kernel parameter "ide=nodma all_generic_ide" to see if it helps.

the different to 2.6.30 and 2.6.26 is that the 2.6.26 sets
CONFIG_IDE=m

while 2.6.30 sets:
CONFIG_IDE=y

Regards,
Punky

On 8/2/2010 8:11 PM, kadiyala srikanth wrote:
> Hi ,
>       I am success with VL 0.5 and can boot on PC as well Embedded-SBC( ICOP's VOrtex-86SX) but with VL 0.6.5 
> successfull only on PC not on Embedded-SBC so what might be the reason ??
>
> and I tried apt-get update on VL0.5 but it was a failure are the repositories not available for the debian etch anymore ?
>  please reply me with the links so that I can update the required utils for VL 0.5
> like glutg3-dev,gcc,make ,kernel-packages,linux-source ?? and so on
>
> Thnks in  AdVance
>
> -- 
> Please Acknowledge,
>
> Thanks & Regards,
> SRIKANTH KADIYALA,
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux


-- 
Regards,
Punky

Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
   - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
   - Network Engineering, Development Platform and Consultation