[Voyage-linux] Leds on Alix 2D3

[Punky Tse]

Hi Giulio,

You need to load ledtrig-netdev as well.

- Punky


Giulio Giandonato wrote:
> Hi,
> I own an Alix 2D3 where I installed Debian Lenny 5.0 and
> linux-image-2.6.26-486-voyage
> (I prefer to use the original Debian instead of Voyage Linux 0.6.2)
>
> I inserted the following modules in /etc/modules to activate leds:
>
> leds-alix
> ledtrig-default-on
> ledtrig-heartbeat
> ledtrig-gpio
> ledtrig-timer
>
> and I created a script in /etc/init.d to start and stop them:
>
> #!/bin/sh
> case $1 in
>  start)
>         echo 'Leds ON'
>         echo heartbeat > /sys/class/leds/alix\:1/trigger
>         echo ide-disk > /sys/class/leds/alix\:2/trigger
>         echo netdev > /sys/class/leds/alix\:3/trigger
>         echo eth0 > /sys/class/leds/alix\:3/device_name
>         echo "link tx rx" > /sys/class/leds/alix\:3/mode
>         ;;
>  stop)
>         echo 'Leds OFF'
>         echo heartbeat > /sys/class/leds/alix\:1/trigger
>         echo heartbeat > /sys/class/leds/alix\:2/trigger
>         echo heartbeat > /sys/class/leds/alix\:3/trigger
>         ;;
> esac
> exit 0
>
> For loading the script at boot time I used these commands:
> chmod +x /etc/init.d/leds
> update-rc.d leds defaults
>
> When I boot, LED1 works in heartbeat mode, LED2 blinks on disk activity
> but LED3 doesn't work and I receive the following errors:
>
> /etc/rc2.d/S20leds: line 7: echo: write error: Invalid argument
> /etc/rc2.d/S20leds: line 8: /sys/class/leds/alix:3/device_name: No
> such file or directory
> /etc/rc2.d/S20leds: line 9: /sys/class/leds/alix:3/mode: No such file
> or directory
>
> I don't know what to do, can you help me?
>
> Thank you.
>
> Bye.
> Giulio
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>