[Voyage-linux] Bridging Wired and Wireless

[Frank Parker]

http://www.foxconnchannel.com/Product/Barebones/NT330i/index.html

http://www.gadgetfolder.com/foxconn-netbox-nt330i-nettop-with-atom-330-and-ion.html

However, I am now hitting some problems.  The case completely blocks
the CPU fan (see photos in second link) resulting in ineffective
cooling, constant high fan rpm and fan noise.  Within a few seconds of
popping off the lid the fan slows to a tolerable (very quiet) RPM.
This causes concern for deploying many of these boxes in remote
offices - will the heat cause stability problems?

I tried to install lm-sensors but sensor-detect couldn't find any temp
sensors.  I'm sure they are there but the lm-sensors package for lenny
doesn't recognize them.  There is a lot of forum chatter about this.
Compiling the latest lm-sensors would probably fix this.

Also, I am noticing a laptop connected to the USB ethernet adapter on
this board has a flapping interface every 14-15 minutes.  Not sure if
this is being caused by the USB dongle or the kernel driver, or who
knows...



On Fri, Feb 26, 2010 at 12:19 PM, Edwin Whitelaw
<Edwin.Whitelaw at nrvunwired.net> wrote:
> Frank,
>
> Whose ATOM board are you using?