[Voyage-linux] DNMA92, ath9k and hostapd with Voyage Linux

[Gonçal Badenes]

Hi!

I believe the directive "wpa=3" already takes care of it (at least it 
works for me :)

According to the hospad docs:
# This field is a bit field that can be used to enable WPA (IEEE 
802.11i/D3.0)
# and/or WPA2 (full IEEE 802.11i/RSN):
# bit0 = WPA
# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)

Cheers,

     Gonçal

On 26/02/2010 06:32, Frank Parker wrote:
> What changes would be required to enable BOTH wpa and wpa2?  I have
> some clients that can only do wpa, but most can do wpa2.  I would
> prefer if hostapd negotiated wpa2 by default but falls back to wpa if
> the client requires it.
>
>
>
> On Tue, Feb 23, 2010 at 8:57 AM, Punky Tse<punkytse at punknix.com>  wrote:
>    
>> Hi all,
>>
>> I have documented the setup of ath9k and hostap on my blog article:
>>    http://www.punknix.com/dnma92-ath9k-and-hostapd-with-voyage-linux
>>
>> Enjoy!
>> Punky
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>
>>      
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>