[Voyage-linux] Problem with fstab

[Beat Meier]

Alessandro

I have done the following workaround to use usb disk on my wrap/alix.
Insert the following lines at the end in /etc/init.d/module-init-tools

----- CUT HERE ----
echo "Waiting 10 seconds to give usb disk time to startup"
sleep 10

exit 0 ## end  from orig file
----- CUT HERE ----

Try to find the time your usb disk needs to startup.
In my case 10s works fine...

Greetings

Beat

On 04/23/2011 11:29 PM, Gustin Johnson wrote:
> Chances are the USB devices are being enumerated after the system has
> finished mounting the drives.  You could put a "mount -a"  in rc.local
> or figure out why the USB devices are not ready at boot.
>
> On Fri, Apr 22, 2011 at 11:14 PM, ALeX <logocomune at gmail.com> wrote:
>   
>> Hi,
>> I run Voyage 0.7.0 on a alix board. I attach two usb disk.
>>
>> I add to /etc/fstab:
>> UUID=d2482476-9ff8-4fec-a2b6-10269065d585 /mnt/hdd1 ext4  defaults 0 0
>> UUID=ec240b7a-a890-44da-b84f-0e5530c0eea7 /mnt/hdd2 ext4 defaults 0 0
>>
>> With the command: "mount -a" everything works as I expect, but when
>> the system don't wont to mount the device during boot.
>>
>> has  someone  a solution?
>>
>> Regards,
>>  Alessandro.
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>
>>     
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>
>