[Voyage-linux] Re: Halt during boot sequence using minicom

[Xeto]

Hermann Gottschalk <voyage at ...> writes:

> 
> On Fri, Aug 12, 2011 at 09:15:17PM +0000, Xeto wrote:
> > bctride <bctride at ...> writes:
> > > here is the boot up sequence. - no errors that I can see it just halts and
> > > does nothing...
> > 
> > 
> > 
> > Same problems with different cf cards... 
> > Any ideas?!
> 
> What is the output of the bootscreen?
> 
> What's about this post:
> http://www.mail-archive.com/voyage-linux-59MrfjRBeRo6ThAmvYpkag <at>
public.gmane.org/msg05143.html
> 

maybe with typos...

Synthesizing the initial hotplug events...[   5.090854] AMD Geode RNG detected
[   5.972677] cs5535-mfd 000:00:0f.0: 5 devices registered.
[   5.973517] input: PC Speaker as /devices/platform/pcspkr/input/input0
[   6.116228] leds_alix2: system is recognized as "PC Engines ALIX.2 v0.98"
[   6.120828] geode-aes: GEODE AES engine enabled
[   6.368426] cs5535-gpio cs5535-gpio: can't request region
[   6.393138] cs5535-gpio: probe of cs5535-gpio failed with error -5
[   6.419025] Error: Driver 'pcspkr' is already registered, aborting...
[   6.422191] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 
0x6200-0x623f]

And then nothing happens...

Tested with Voyage 0.7 and 0.7.5 and Kingston 512MB, Apacer 128MB and Apacer
256MB CF card.