[Voyage-linux] [ASK] Alix CF problem

[Laili Aidi]

Dear Gustin,

Thank you for your respond.
Yes, i have tried that, but no USB connection detected, while the other CF and the same CF reader can be seen.
It seems for some reason the CF break after the installation. could be when i power up the board, because before that I could connect to that CF trough the CF reader and install voyage into it.

Aidi

On 16 aug 2011, at 05.02, Gustin Johnson wrote:

The minicom configuration is for the computer that you are in front
of.  If you are getting an error that /dev/USB0 does not exist, this
error is on your workstation not the Alix or CF card.  "ls /dev/tty*"
will list all of your tty devices.  When you plug in your USB to
serial adaptor, "dmesg" might shed some light on what is happening.

On Mon, Aug 15, 2011 at 6:55 PM, Laili Aidi <aidi at kth.se<mailto:aidi at kth.se>> wrote:
Dear Gustin,
Yes, I used both USB to Serial adaptor and CF reader. I managed to connect
to the board before, i used 0.6. and I just installed voyage 0.7.5 to the
board,
After installation finish, the I plugged the CF to the board, but the
minicom never detect the connection. Then I tried to unplug the CF from the
board again, and put it into the CF, but now it can't be read anymore. I use
this configuration in minicom (it worked before with the same CF):

A - Serial Device: /dev/ttyUSB0

B - Lockfile Location: /var/lock

C - Callin Program:

D - Callout Program:

E - Bps/Par/Bits: 38400 8N1

F - Hardware Flow Control: No

G - Software Flow Control: No

Aidi
On 16 aug 2011, at 02.18, Gustin Johnson wrote:
Are you using a USB to Serial adaptor on the computer that you are
running minicom on?


2011/8/15 Laili Aidi <aidi at kth.se<mailto:aidi at kth.se>>:

Hello,

Currently I'm trying to set up a WSN/DTN gateway in the Alix board.

I just installed the Alix board with Voyage 0.7.5 version using CF

card. After the installation success, I plug the CF to the board again and

power it up.

But when trying to connect through the serial connection, the minicom detect

no such /dev/ttyUSB0.

I tried to move out the CF again, and put it into the CF reader, but now

even the CF card is not detected at all what so ever we try to plug it in

different linux machines. The other CF is detected using the same CF reader,

and before this CF can be read, as I used it to install the Voyage 0.7.5

into it.

Anybody gas some idea about this? is that something problem with the CF?

Aidi

_______________________________________________

Voyage-linux mailing list

Voyage-linux at list.voyage.hk<mailto:Voyage-linux at list.voyage.hk>

http://list.voyage.hk/mailman/listinfo/voyage-linux





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20110816/0796c615/attachment.html>