[Voyage-linux] Voyage Linux 0.7.0 (27-May-2011 build) and WPA_Supplicant

[John Schultz]

I am having issues getting WPA_Supplicant running in ad-hoc mode for a
multi-node mesh network.

Right now, there are only two nodes in this network as this is a development
setting.

Both nodes are running 2.6.38 or better

Config for node 1 is as follows:
wlan0 is a DNMA-92

interfaces file:

> auto lo
>
iface lo inet loopback
>
> auto eth0
> iface eth0 inet dhcp
>
> auto wlan0
> iface wlan0 inet static
>         address 10.1.0.1
>         netmask 255.0.0.0
>         broadcast 10.0.0.0
>         gateway 10.0.0.1
>         wireless-channel 149
>         wireless-essid #################
>         wireless-mode ad-hoc
>

wpa_supplicant.conf

> ctrl_interface=/var/run/wpa_supplicant
> network={
>         ssid="#################"
>         key_mgmt=WPA-NONE
>         mode=1
>         proto=WPA
>         pairwise=NONE
>         group=TKIP
>         psk="#################"
> }
>

when this node is started up, I get
ioctl[SIOCSIWPMKSA]: Invalid argument

I have tried adding the wpa-conf flag in the interfaces as well as calling
wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf -B and get the same
results either way.

For node 2, the config is virtually the same with the exception that wlan0
is now wlan1. wlan1 on this node is for client access using hostapd.

Ive spent over 8 hours on this problem so far with no luck and have not been
very fruitful searching google as everything I have found is a different
configuration of the above mentioned.

Any assistance ANY one can provide would be most appreciative.

Thanks,
John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20110531/b46d2e90/attachment.html>