[Voyage-linux] QB9 and some earlier silly questions of mine

[Kim-man 'Punky' TSE]

On 5/5/2011 12:06 AM, jegunn wrote:
> Most importantly, I discovered that whether the QB9 works or not with its USB2.0 setting is very dependent on 
> sequencing. For me, on two machines running voyage, if you power up the QB9 with the USB connected, it does NOT work; 
> one gets the ubiquitous
That's is a good information for troubleshooting.
>
> ALSA clock.c:227: 4:1:1: cannot get frequency at ep 0x1
That shall be something to look into further.
> and the display immediately comes up "96", and it will not play
> anything.
>
> If, on the other hand, you plug in the USB with voyage running and
> the QB9 powered and running, it works fine. I will keep you posted
> on further developments. One of the machines, a mini-itx with
> a Zotac M880G motherboard, is running 7.0; the other, an old
> VIA C7 mini-itx, is running the slightly more recent current version
> I downloaded a couple of days ago; I do not think there are significant
> changes from 7.0, but Punky could comment.
If you download the daily instead of 0.7.0, the kernel are different now.  The mpd daily is now 2.6.38...

> --jim gunn

-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage ONE   (http://linux.voyage.hk/voyage-one)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
* Voyage Store   (http://store.voyage.hk)