[Voyage-linux] Basic Wifi problem
Big Booger
(spam-protected)
Fri May 6 12:53:20 HKT 2011
Hi
I am having some wifi problems with an Alix board and an athereos wifi mini PCI
card. I have voyage mpd 7.7.0 on the alix. I have the board running no problem
through ethernet, and the wifi card scans (see iwlist below). Also when I run
nmap on my network I get the ethernet connection showing and another address
that I assume is the wifi connection. I can ssh into the wifi address (at least
I assume it is the wifi address), but when I disconnect the ethernet cable my
connection through the wifi address is disabled. Does anyone have any insight
into what is going on here? I would like to have this alix board supply my DAC
and connect to my Arch Server through wifi - i do not want to have to have an
ethernet cable permenently connected to the board. I have tried booting the
board up with out an Ethernet cable connected, and nmap shows no new connection
onto my network. Any help is appreciated.
I have attached some information below. Let me know if I should supply any more
information.
Regards,
Matt
>From running #iwlist ath0 scan
Cell 02 - Address: 06:26:F2:F4:31:E5
ESSID:"TestMatt"
Mode:Master
Frequency:2.422 GHz (Channel 3)
Quality=42/70 Signal level=-53 dBm Noise level=-95 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:bcn_int=200
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Extra:wme_ie=dd180050f2020101850003a4000027a4000042435e0062322f00
Interfaces file contents:
# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
auto ath0
iface ath0 inet dhcp
madwifi-base wifi0
wireless-mode Managed
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
Contents of wpa_supplicant.conf:
network={
ssid="TestMatt"
#psk="password"
psk=96c98dc5ca179fe2286d29eb0dd5021ad44fac388c1aeae121b8de6e40e2fa65
key_mgmt=WPA-PSK
proto=WPA
# proto=RSN #uncomment for WPA2
}
Output of # lspci
00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host
Bridge (rev 33)
00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX
AES Security Block
00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
00:0e.0 Ethernet controller: Atheros Communications Inc. AR5413 802.11abg NIC
(rev 01)
00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA
(rev 03)
00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE
(rev 01)
00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion]
OHC (rev 02)
00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion]
EHC (rev 02)
More information about the Voyage-linux
mailing list