[Voyage-linux] can´t get Atheros AR9280 (ath9k) in AP mode

[Punky Tse]

Another way for us to troubleshoot is to send us the output of "lspci 
-v" and "dmesg".  And you could also change wpa=1 or wpa=2 to see if 
your client computer can see the AP.

On 15/5/2011 22:29, Pablo Escobar wrote:
> I have seen voyage-current has a  /etc/hostapd/hostapd.wlan0.conf file 
> by default. So I edited the /etc/default/hostapd to use that config 
> and I keep getting the same output from iwconfig and I can´t see the 
> ap ssid with my client computer :(


-- 

Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage ONE   (http://linux.voyage.hk/voyage-one)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
* Voyage Store   (http://store.voyage.hk)