[Voyage-linux] Static IP on Alix

[John Schultz]

Shouldn't you just be able to specify what interface ssh uses?

On Sat, Sep 3, 2011 at 21:59, Gustin Johnson <gustin at meganerd.ca> wrote:

> I am not sure that I understand what you are trying to do.  Are both
> interfaces on the same network with IPs that part of the same subnet?
>
> If the problem happens after one of your interfaces gets an IP via
> DHCP then you could also have routing issues.  Check for more than one
> default route with "ip route".
>
> You could also force SSH to listen on a specific IP with the
> ListenAddress option in /etc/ssh/sshd_config file.
>
>
> 2011/9/3 John Schultz <jschultz0614 at gmail.com>:
> >>>   First, move the nameservers to the /etresolvconf/{correct file
> location
> >>> and name}
> >>
> >> ok, i have put the nameserver in /resolvconf/run/resolv.conf
> >
> > Wait,... /resolveconf/run/resolve.conf? No.... should be
> > /etc/resolvconf/resolv.conf.d/tail (i think. it could be base or tail)
> >
> >
> >>> If you have both set to dynamic, what settings do you get (please paste
> a
> >>> full report)
> >>
> >> DDns?... no dynamic DNS
> >
> > No not DDNS
> >
> > set your IP settings to dynamic.
> >
> >
> >>
> >>> Second, is the device your SSHing into on your network or elsewhere?
> >>
> >> the device is on my local network. If i deactivate eth1 tne connection
> on
> >> eth0 return fast.
> >
> > You may need to filter ssh traffic to only use eth0 rather then on both
> eth0
> > and 1.
> >
> >
> > Good luck,
> > John
> >
> > _______________________________________________
> > Voyage-linux mailing list
> > Voyage-linux at list.voyage.hk
> > http://list.voyage.hk/mailman/listinfo/voyage-linux
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20110904/9cccac7a/attachment-0002.html>