[Voyage-linux] Static IP on Alix

[Gustin Johnson]

Nothing to be a afraid of, just think of it as networking 201.  Once
you get the basics of a single interface under control, the next step
is to work with multipath situations.  The good news is that this is
well supported by the Linux kernel and the userspace utilities.

You may want to look at http://lartc.org for some pretty good
documentation of more advanced networking concepts and techniques.

On Sun, Sep 4, 2011 at 1:49 PM, John Schultz <jschultz0614 at gmail.com> wrote:
> That is ultimately what I was afraid of.
>
> I tried several months ago (before I started working on the PXE and UDEV
> issues)  with no luck.
>
> It eventually destabilized the node and then the networking  died.
>
> On Sun, Sep 4, 2011 at 12:56, Gustin Johnson <gustin at meganerd.ca> wrote:
>>
>> In that case, you need to be careful about your routing table,
>> especially if dhcp is involved.  Either one of you may wish to change
>> your DHCP client to something else, like the ISC one and then
>> configure which aspects get configured.
>>
>>
>> On Sun, Sep 4, 2011 at 12:24 PM, John Schultz <jschultz0614 at gmail.com>
>> wrote:
>> > Actually, not at all...
>> >
>> > Roberto's and ultimately my situation are completely different.
>> > Roberto's
>> > situation sounds like a segmentation issue. Mine will be similar,
>> > however I
>> > am using one wireless network for a backhual, the second wireless
>> > network or
>> > client connectitivity and the hardwire ethernet as a uplink to the
>> > internet
>> > or another network..
>> >
>
>